Never seen that myself but if you're simply disconnecting the client to fix it I would
a) update everything to the latest version in that branch b) replace radios Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Feb 15, 2011 at 4:57 PM, Scott Reed <[email protected]> wrote: > I use MT RB4xx with UBNT XR? cards for APs and RB411 with R52, SR9 or XR9 > cards for most locations. Occasionally a CPE will quit communicating with > the AP. Go into the AP registration table and disconnect the client, > everything is OK. Not all APs and some that have the problem have a chronic > CPE or two, others it is very random. Any suggestions what may cause them > to have good RSSI, good CCQ and not pass data? > > -- > Scott Reed > Owner > NewWays Networking, LLC > Wireless Networking > Network Design, Installation and Administration > Mikrotik Advanced Certified > www.nwwnet.net > (765) 855-1060 > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://www.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://www.butchevans.com/pipermail/mikrotik/attachments/20110215/5cb36384/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
