CM9 does not do 10mhz or 5mhz channels. Pretty sure the WLM54ag cards do.
On 10/24/11 4:01 PM, Chuck Hogg wrote:
I know there are cards that have issues. I think it's the WLM54g or
the CM9 that can't do non-standard channels...there might be more.
Regards,
Chuck
On Mon, Oct 24, 2011 at 4:53 PM, Josh Luthman
<[email protected]> wrote:
I am trying to change my 5ghz APs to save on spectrum. I have one AP
with 3 customers, A B and C. On all three I see 5ghz-10 as a wireless
mode option in the GUI/Winbox. I changed the three to 5ghz-10 mode,
then the AP, and lost C.
Is there a way to identify what cards are compatible? I'm looking to
build my own chart if needed. To do this I need to figure out what
cards are in the customers' radios.
(yes or no denotes if there is an HT tab for two chains)
00:0C:42:65:90:50 Wireless (Atheros 11N) yes no chip info?
00:0C:42:61:1B:1B Wireless (Atheros 11N) yes mac:0x80/0x2, phy:0xd0,
a5:0xc0, a2:0x0, eeprom:0x0
#believe this is an xr5, almost certain
00:15:6D:65:D3:2C Wireless (Atheros AR5413) no mac:0xa/0x5,
phy:0x61,
a5:0x63, a2:0x0, eeprom:0x5003
The AP is an xr5, I am positive. This is obviously compatible with 10
Mhz channels.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
