When we tested it, I was using pings w/65535 byte packets :) return trip 3 ms... lol
I'll look into VPLS ... thanks. On Tue, Oct 25, 2011 at 1:58 PM, Blake Covarrubias <[email protected]> wrote: > Is it your fiber, or can you put packets higher than 1500 bytes on the wire? > If so, VPLS. > > http://wiki.mikrotik.com/wiki/Manual:MPLSVPLS > > -- > Blake Covarrubias > > On Oct 25, 2011, at 8:45 AM, Rick Smith wrote: > >> Hi all; >> >> I've got three Mikrotik RB1200's. All connected via Fiber, to ether1 >> on each router. >> Each site separated by 10 miles.... >> >> So, the customer wants one vlan spread across all these sites, where they can >> get DHCP clients to get addresses from a central server in the center site >> for >> things on that VLAN only... there's a lot else going on, at each of these >> sites, >> that needs to stay individualized per site, but there's 5 VLANs they want to >> spread across the sites if this one works.... >> >> So, how ? EOIP ? Bridges ? >> >> Oh, and SOME day there may be wireless backup between sites, which would >> still need to transfer those vlans... >> >> THanks >> >> Rick >> _______________________________________________ >> Mikrotik mailing list >> [email protected] >> http://www.butchevans.com/mailman/listinfo/mikrotik >> >> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://www.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS > _______________________________________________ Mikrotik mailing list [email protected] http://www.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
