dear scott,
please can you send a step by step how to enable this crapy mimo ?
i want at least 150 or if pocible 300.
thank !
----- Original Message -----
From: "Scott Lambert" <[email protected]>
To: "Mikrotik discussions" <[email protected]>
Sent: Thursday, December 20, 2012 10:22 PM
Subject: Re: [Mikrotik] RB951-2N MIMO configuration
On Thu, Dec 20, 2012 at 11:42:21AM +0100, Tayeb Meftah wrote:
Hello,
do i need any special configuration to be able to have a MIMO situation?
My Wireless range is too crazy these days ;-)
also the Speed in my Laptop with the RB is 65.00MB/S, no clue why.
if used with a linksys E3200, i got 300Mbit/s
Enabling both MIMO channels will get you near 150Mbps.
To get to 300Mbps you will have to set channel width to "20/40MHz
HT Above" or "20/40/MHz HT Below". But you may not be able to
utilize the throughput potential gained by going to a 40MHz channel.
Depends on your network configuration and what you want to do with
it.
--
Scott Lambert KC5MLE Unix
SysAdmin
[email protected]
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://www.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
