Do you have 5.22 installed on both ends of the link? AP and Client both? If not you want to do that first and also make sure that all clients associated with that AP are also running 5.22.
The other thing would be noise on either end of the link make sure you check noise levels. What wireless protocol are you running? -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Troy Settle Sent: Monday, January 07, 2013 4:08 PM To: [email protected] Subject: [Mikrotik] -55db but can't pass serious traffic All, I have a RB711UA-2HnD (one of several actually) that's giving me a fit. Client radios (G and N) can connect with signals between -55 and -60 (both chains, both directions), but the rate comes in at 1Mbit/s. With a little traffic (pings), the rate will go up to 5.5, 6, or 6.5Mbit/s, it even hit 9 and 11Mbit/s for a while. Pinging with larger packets (500 bytes) at shorter intervals (250ms), and the packets start dropping. ROS 5.22, FW 3.0. Rebooted, reset config, nothing seems to help. Anyone know of anything specific I can check before I call a climber to replace it? Thanks, -Troy -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20130107/a062a654 /attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
