Hi all,
I have the following question. I have done the bonding of 2 interfaces
and I have choosen the "broadcast" mode. Accordingly to the manual I
should receive 2 packets on the other side, i.e. the pure replica of the
same packets on both lines.
For example if I inject 1M into the bonding interface I will see 1M on
one line and 1Mega on the other line, and what happens is that I see
2Mega on the other end of the bonding link.
I am trying this configuration because I have some packet loss on one of
the two lines so I thought "hey this could be cool to try so maybe at
least one will arrive to destination".
So when the receiver end, receives 2 packets this should be nice but
instead it gets confused. So I was wondering if there is some "filter"
that I could apply on the receving-end so that if the packet has been
already transmitted on the physical interface then the "copy" will be
dropped.
Any suggestion?
Thank you
--
Ing. Paolo Di Francesco
Level7 s.r.l. unipersonale
Sede operativa: Largo Montalto, 5 - 90144 Palermo
C.F. e P.IVA 05940050825
Fax : +39-091-8772072
assistenza: (+39) 091-8776432
web: http://www.level7.it
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
