Does anyone have any thoughts on this?
Rory McCann
MKAP Technology Solutions
Web: www.mkap.net
On 9/26/2013 9:08 AM, Rory McCann wrote:
I am considering deploying MSTP on my network to provide redundancy
for my other VLANs and it doesn't look like MT has native support for
it. My understanding is that MSTP supports "fallback" to RSTP.
I have HP switches and use Mikrotik as my routing platform. I have an
EoIP tunnel set up that acts as an alternate path (over the internet)
to root for my existing RSTP implementation.
Wondering if I were to create bridges for each VLAN I want redundancy
and assign them the same RSTP value (same value unique to each
switch/device) if it would work? I also imagine I would have to create
an EoIP tunnel for each bridge that I would want to failover using the
internet.
So I'm thinking my config would be like this:
VLAN1
Router1, bridge 1 - RSTP - priority 0: eoip tunnel 1, vlan interface 1
MSTP configuration on switches
Router2, bridge 1 - RSTP - priority F000: eoip tunnel 1, vlan interface 1
VLAN2
Router1, bridge 2 - RSTP - priority 0: eoip tunnel 2, vlan interface 2
MSTP config on switches
Router2, bridge 2 - RSTP - priority F000: eoip tunnel 2, vlan interface 2
etc.
Since the interfaces would be unique to each bridge, would this work?
I admit it would be a bit hacky, but the EoIP would only be used when
all other paths fail.
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
