/system reset-config no-defaults=yes Or /system reset-config use-defaults=no
I forget which version of the command is the current one. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paul McCall Sent: Saturday, January 18, 2014 8:19 PM To: Mikrotik discussions Subject: Re: [Mikrotik] Thank you to Butch and I will pass along a helpful hint. Yes, after the /sys reset, we have to then remove the default config it places on the router. However, I tried what I described twice. With the MAC server set to all interfaces, and the FW rules all disabled, it still wouldn't to MAC access on port 1. So, I resorted to having to do the /sys reset, so that I had the opportunity to do the Remove of the config completely after the reboot / initial login. Paul -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Scott Reed Sent: Saturday, January 18, 2014 2:08 PM To: Mikrotik discussions Subject: Re: [Mikrotik] Thank you to Butch and I will pass along a helpful hint. The first thing we do with RB751 is a System->Reset. Then do what we want with them. Normally just deleting the firewall rules will get full access on port 1. I don't know what your third thing may be. On 1/18/2014 12:25 PM, Paul McCall wrote: > We just recently started using a lot of the RB751 High powered WiFi units for our residential clients. The sales guy sold an upgrade of one of these to a remote customer (over an hour away) and we just shipped him one, "knowing" that we could config it remotely. > > After jerking around for a while over the phone, we could see the LAN connection on the wireless radio come and go as he unplugged the unit, but we still couldn't see it by MAC to telnet in to program it, etc. > > Turns out the default config on the residential router totally blocks access to Port 1 by....1) not having that port in the MAC server list, by having a FW rule, and by something else (*which I am not sure what that is). > > Fixing those things above, I still had to remove the default config from the router (after a fresh /sys reset) and then all is find. > > I am kinda curious what third setting would need to have been adjusted > to make MAC remote access available on Port 1 > > Hmmmm... > > Paul > > Paul McCall, Pres. > PDMNet / Florida Broadband > 658 Old Dixie Highway > Vero Beach, FL 32962 > 772-564-6800 office > 772-473-0352 cell > www.pdmnet.com<http://www.pdmnet.com/> > [email protected]<mailto:[email protected]> > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: > <http://mail.butchevans.com/pipermail/mikrotik/attachments/20140118/af > b994ca/attachment.html> > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2014.0.4259 / Virus Database: 3681/7013 - Release Date: > 01/18/14 > > -- Scott Reed Owner NewWays Networking, LLC Wireless Networking Network Design, Installation and Administration Mikrotik Advanced Certified www.nwwnet.net (765) 855-1060 (765) 439-4253 Toll-free (855) 231-6239 _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
