I ran across something today as I was troubleshooting and I have never seen it before. Guess I wasn't paying attention before. There are three 120 sectors, each with its own 433AH on a rohn tower running 5.x RouterOS. Radios are in enclosures up with the sectors. Looking at a scan off of a 433AH with an XR2 I see two entries in the list of the other sectors. One with a good signal on the freq it is set for and one with a -80's signal on some random freq. So from sector1 I see two sector 2s and two sector 3s. The only exception is where I had one that the board was at the bottom and using a heliax feed line. Saw only one of that one. I checked several rohns and all had that behavior. I don't see it on water towers. If I disable that radio, both entries disappear from the scan. Anyone run across that? Any ideas?
Terri Kelley Network Engineer Farm to Market Broadband -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20140206/a6ca0e1d/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
