I've done this before but can't remember exactly how I did it. So, I have a
defaulted ePMP at a remote site that for some reason isn't accepting a DHCP
lease. I want to get into it but it doesn't have a default gateway for the
192.168.0.1 AP address it defaults to.
What are the Mikrotik NAT rules I need to get access to the AP? Here is
what I have so far:
add action=dst-nat chain=dstnat disabled=no dst-address=P.U.B.L.I.C
dst-port=80 \
protocol=tcp to-addresses=192.168.0.1 to-ports=80
add action=src-nat chain=srcnat disabled=no src-address=192.168.0.1 \
to-addresses=P.U.B.L.I.C
add action=masquerade chain=srcnat disabled=no out-interface=ether5 \
src-address=192.168.0.0/24
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20140522/17ff7594/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
