You're masquerading it right.  Dstnat rules have to be to blame.  Did you
change them?

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Jun 8, 2014 6:23 PM, "Casey Mills" <[email protected]> wrote:

> I really appreciate your help Josh.  But still not working.  Any other
> ideas?
>
> Here are my firewall rules.  I disabled the last input rule that drops
> input traffic but didn't make a difference.
>
> /ip firewall filter
> add chain=input comment="Allow all local traffic in"
> in-interface=bridge-local
> add chain=input protocol=icmp
> add chain=input connection-state=established
> add chain=input connection-state=related
> add action=drop chain=input in-interface=ether1-gateway
> add chain=forward connection-state=established
> add chain=forward connection-state=related
> add chain=forward
>
>
> This is my only NAT rule now, other than the port forwarding rules.
>
> chain=srcnat action=masquerade src-address=192.168.55.0/24
>
> Thanks,
> Casey
>
>
> On Sun, Jun 8, 2014 at 6:05 PM, Josh Luthman <[email protected]>
> wrote:
>
> > Drop the first rule.
> >
> > Second rule, drop the protocol.
> >
> > The latter rules won't apply because you're not coming from that
> interface.
> >
> > Josh Luthman
> > Office: 937-552-2340
> > Direct: 937-552-2343
> > 1100 Wayne St
> > Suite 1337
> > Troy, OH 45373
> > On Jun 8, 2014 5:58 PM, "Casey Mills" <[email protected]> wrote:
> >
> > > Hmm, that didn't do the trick.  Here is what my NAT table looks like.
> > >
> > > add action=masquerade chain=srcnat comment="default configuration"
> > > out-interface=ether1-gateway to-addresses=0.0.0.0
> > > add action=masquerade chain=srcnat comment=Hairpin-Test protocol=tcp
> > > src-address=192.168.55.0/24
> > > add action=dst-nat chain=dstnat comment=Foscam-1 dst-port=8080
> > > in-interface=ether1-gateway protocol=tcp to-addresses=192.168.55.200
> > > to-ports=8080
> > > add action=dst-nat chain=dstnat comment=Foscam-2 dst-port=8081
> > > in-interface=ether1-gateway protocol=tcp to-addresses=192.168.55.201
> > > to-ports=8081
> > >
> > > I loaded up Torch and can see when trying to access my dynamic DNS name
> > > with the port it is translated to the external IP address on my router.
> >  So
> > > the router is seeing the request?  The router's response is likely
> coming
> > > from the inside IP address and not being masqueraded?
> > >
> > > Casey
> > >
> > >
> > > On Sun, Jun 8, 2014 at 2:47 PM, Josh Luthman <
> > [email protected]>
> > > wrote:
> > >
> > > > Drop the last two arguments.
> > > >
> > > > Josh Luthman
> > > > Office: 937-552-2340
> > > > Direct: 937-552-2343
> > > > 1100 Wayne St
> > > > Suite 1337
> > > > Troy, OH 45373
> > > > On Jun 8, 2014 2:27 PM, "Casey Mills" <[email protected]> wrote:
> > > >
> > > > > I started with that but no luck. Here is what I tried.
> > > > >
> > > > > chain=srcnat action=masquerade protocol=tcp src-address=
> > > 192.168.55.0/24
> > > > > dst-address=192.168.55.0/24 out-interface=bridge-local
> > > > >
> > > > > Casey
> > > > > On Jun 8, 2014 11:54 AM, "Josh Luthman" <
> [email protected]
> > >
> > > > > wrote:
> > > > >
> > > > > > Just blanket masquerade the local subnet and you're done.  So
> much
> > > less
> > > > > > pain and the downsides don't generally apply to small home/office
> > > > > networks.
> > > > > >
> > > > > >
> > > > > > Josh Luthman
> > > > > > Office: 937-552-2340
> > > > > > Direct: 937-552-2343
> > > > > > 1100 Wayne St
> > > > > > Suite 1337
> > > > > > Troy, OH 45373
> > > > > >
> > > > > >
> > > > > > On Sun, Jun 8, 2014 at 11:50 AM, Casey Mills <[email protected]>
> > > wrote:
> > > > > >
> > > > > > > Thanks everyone!  Adding in-interface=ether1-gateway made
> > > everything
> > > > > work
> > > > > > > as expected.
> > > > > > >
> > > > > > > Funny that you mention hairpin, I was going to tackle that
> next.
> > >  Not
> > > > > > > having any luck so far.  Trying to get it working for one
> device,
> > > > then
> > > > > > > hopefully expanding the rule to cover all hairpin traffic.
> > > > > > >
> > > > > > > Any thoughts on ports 2-5 being part of bridge-local on a
> rb2011?
> > > > > > >
> > > > > > > So far neither of these have worked.
> > > > > > > chain=srcnat action=masquerade protocol=tcp src-address=
> > > > > 192.168.55.0/24
> > > > > > > dst-address=192.168.55.200 out-interface=bridge-local
> > dst-port=8080
> > > > > > >
> > > > > > > chain=srcnat action=masquerade protocol=tcp src-address=
> > > > > 192.168.55.0/24
> > > > > > > dst-address=192.168.55.200 out-interface=ether3 dst-port=8080
> > > > > > >
> > > > > > > Casey
> > > > > > >
> > > > > > >
> > > > > > > On Sat, Jun 7, 2014 at 5:38 PM, Alexander Neilson <
> > > > > > > [email protected]>
> > > > > > > wrote:
> > > > > > >
> > > > > > > > Josh has hit the target
> > > > > > > >
> > > > > > > > Your port 80 rule doesn’t specify the interface so anything
> > > defined
> > > > > for
> > > > > > > > port 80 is being redirected to your internal box.
> > > > > > > >
> > > > > > > > This includes standard website requests, which will be
> > preventing
> > > > > your
> > > > > > > > internet surfing.
> > > > > > > >
> > > > > > > > Just add in-interface=ether1-gateway and things should work.
> > > > > > > >
> > > > > > > > Regards
> > > > > > > > Alexander
> > > > > > > >
> > > > > > > > Alexander Neilson
> > > > > > > > Neilson Productions Limited
> > > > > > > >
> > > > > > > > [email protected]
> > > > > > > > 021 329 681
> > > > > > > > 022 456 2326
> > > > > > > >
> > > > > > > > On 8/06/2014, at 9:04 am, Grand Avenue Broadband <
> > > > > > > > [email protected]> wrote:
> > > > > > > >
> > > > > > > > > I'm assuming you mean "it kills my ability to browse TO THE
> > WAN
> > > > IP
> > > > > > > using
> > > > > > > > a device on the inside of my network."  If that is accurate,
> > see
> > > > > here:
> > > > > > > > >
> > > > > > > > > http://wiki.mikrotik.com/wiki/Hairpin_NAT
> > > > > > > > >
> > > > > > > > > If you mean "it kills my ability to browse TO THE LAN IP
> > using
> > > a
> > > > > > device
> > > > > > > > on the inside of my network," Joshs advice has already hit
> the
> > > > > target.
> > > > > > > > >
> > > > > > > > > On Jun 7, 2014, at 1:15 PM, Casey Mills <[email protected]>
> > > > wrote:
> > > > > > > > >
> > > > > > > > >> I was pretty big into Mikrotik in years past, but haven't
> > been
> > > > > > active
> > > > > > > in
> > > > > > > > >> some time.
> > > > > > > > >>
> > > > > > > > >> I just picked up a RB2011 and want to forward ports 80,
> 443,
> > > and
> > > > > > 50500
> > > > > > > > for
> > > > > > > > >> my network storage device.  When I dstnat those ports
> below
> > it
> > > > > kills
> > > > > > > my
> > > > > > > > >> ability to browse using a device on the inside of my
> > network.
> > > > >  This
> > > > > > > has
> > > > > > > > to
> > > > > > > > >> be something simple, please help.
> > > > > > > > >>
> > > > > > > > >> I'm not sure how traffic originating from the outside and
> > > > destined
> > > > > > for
> > > > > > > > my
> > > > > > > > >> network storage is treated.  Ideally it should be handled
> by
> > > the
> > > > > > > forward
> > > > > > > > >> chain, but it will have a destination IP of the WAN side
> of
> > > the
> > > > > > > router.
> > > > > > > >  So
> > > > > > > > >> that makes me think imput chain.
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> /ip firewall filter
> > > > > > > > >> add chain=input protocol=icmp
> > > > > > > > >> add chain=input connection-state=established
> > > > > > > > >> add chain=input connection-state=related
> > > > > > > > >> add action=drop chain=input in-interface=ether1-gateway
> > > > > > > > >> add chain=forward connection-state=established
> > > > > > > > >> add chain=forward connection-state=related
> > > > > > > > >> add action=drop chain=forward connection-state=invalid
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> /ip firewall nat
> > > > > > > > >> add action=masquerade chain=srcnat
> > > out-interface=ether1-gateway
> > > > > > > > >> to-addresses=0.0.0.0
> > > > > > > > >> add action=dst-nat chain=dstnat comment=Foscam-1
> > dst-port=8080
> > > > > > > > protocol=tcp
> > > > > > > > >> to-addresses=192.168.55.200 to-ports=8080
> > > > > > > > >> add action=dst-nat chain=dstnat comment=Foscam-2
> > dst-port=8081
> > > > > > > > protocol=tcp
> > > > > > > > >> to-addresses=192.168.55.201 to-ports=8081
> > > > > > > > >> add action=dst-nat chain=dstnat comment=IX2 disabled=yes
> > > > > > > > >> dst-address-type="" dst-port=80 protocol=tcp
> > > > > > > to-addresses=192.168.55.54
> > > > > > > > >> to-ports=80
> > > > > > > > >> add action=dst-nat chain=dstnat comment=IX2 disabled=yes
> > > > > > > > >> dst-address-type="" dst-port=443 protocol=tcp
> > > > > > > to-addresses=192.168.55.54
> > > > > > > > >> to-ports=443
> > > > > > > > >> add action=dst-nat chain=dstnat comment=IX2 disabled=yes
> > > > > > > dst-port=50500
> > > > > > > > >> protocol=tcp to-addresses=192.168.55.54 to-ports=50500
> > > > > > > > >> add action=dst-nat chain=dstnat comment=Casey7-RDP
> > > dst-port=3389
> > > > > > > > >> protocol=tcp to-addresses=192.168.55.52 to-ports=3389
> > > > > > > > >> add action=dst-nat chain=dstnat comment=HTPC7-Plex
> > > > dst-port=32400
> > > > > > > > >> protocol=tcp to-addresses=192.168.55.50 to-ports=32400
> > > > > > > > >> add action=dst-nat chain=dstnat comment=HTPC7-CetonApp
> > > > > dst-port=5832
> > > > > > > > >> protocol=tcp to-addresses=192.168.55.50 to-ports=5832
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> Thanks,
> > > > > > > > >> Casey
> > > > > > > > >> -------------- next part --------------
> > > > > > > > >> An HTML attachment was scrubbed...
> > > > > > > > >> URL: <
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140607/7f0955d3/attachment.html
> > > > > > > > >
> > > > > > > > >> _______________________________________________
> > > > > > > > >> Mikrotik mailing list
> > > > > > > > >> [email protected]
> > > > > > > > >> http://mail.butchevans.com/mailman/listinfo/mikrotik
> > > > > > > > >>
> > > > > > > > >> Visit http://blog.butchevans.com/ for tutorials related
> to
> > > > > Mikrotik
> > > > > > > > RouterOS
> > > > > > > > >
> > > > > > > > > _______________________________________________
> > > > > > > > > Mikrotik mailing list
> > > > > > > > > [email protected]
> > > > > > > > > http://mail.butchevans.com/mailman/listinfo/mikrotik
> > > > > > > > >
> > > > > > > > > Visit http://blog.butchevans.com/ for tutorials related to
> > > > > Mikrotik
> > > > > > > > RouterOS
> > > > > > > >
> > > > > > > > -------------- next part --------------
> > > > > > > > A non-text attachment was scrubbed...
> > > > > > > > Name: smime.p7s
> > > > > > > > Type: application/pkcs7-signature
> > > > > > > > Size: 4127 bytes
> > > > > > > > Desc: not available
> > > > > > > > URL: <
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/9821d202/attachment.bin
> > > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Mikrotik mailing list
> > > > > > > > [email protected]
> > > > > > > > http://mail.butchevans.com/mailman/listinfo/mikrotik
> > > > > > > >
> > > > > > > > Visit http://blog.butchevans.com/ for tutorials related to
> > > > Mikrotik
> > > > > > > > RouterOS
> > > > > > > >
> > > > > > > -------------- next part --------------
> > > > > > > An HTML attachment was scrubbed...
> > > > > > > URL: <
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/bba86333/attachment.html
> > > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Mikrotik mailing list
> > > > > > > [email protected]
> > > > > > > http://mail.butchevans.com/mailman/listinfo/mikrotik
> > > > > > >
> > > > > > > Visit http://blog.butchevans.com/ for tutorials related to
> > > Mikrotik
> > > > > > > RouterOS
> > > > > > >
> > > > > > -------------- next part --------------
> > > > > > An HTML attachment was scrubbed...
> > > > > > URL: <
> > > > > >
> > > > >
> > > >
> > >
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/4b2343c0/attachment.html
> > > > > > >
> > > > > > _______________________________________________
> > > > > > Mikrotik mailing list
> > > > > > [email protected]
> > > > > > http://mail.butchevans.com/mailman/listinfo/mikrotik
> > > > > >
> > > > > > Visit http://blog.butchevans.com/ for tutorials related to
> > Mikrotik
> > > > > > RouterOS
> > > > > -------------- next part --------------
> > > > > An HTML attachment was scrubbed...
> > > > > URL: <
> > > > >
> > > >
> > >
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/a16411c4/attachment.html
> > > > > >
> > > > > _______________________________________________
> > > > > Mikrotik mailing list
> > > > > [email protected]
> > > > > http://mail.butchevans.com/mailman/listinfo/mikrotik
> > > > >
> > > > > Visit http://blog.butchevans.com/ for tutorials related to
> Mikrotik
> > > > > RouterOS
> > > > -------------- next part --------------
> > > > An HTML attachment was scrubbed...
> > > > URL: <
> > > >
> > >
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/6d777f8d/attachment.html
> > > > >
> > > > _______________________________________________
> > > > Mikrotik mailing list
> > > > [email protected]
> > > > http://mail.butchevans.com/mailman/listinfo/mikrotik
> > > >
> > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> > > > RouterOS
> > > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL: <
> > >
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/0b5859ac/attachment.html
> > > >
> > > _______________________________________________
> > > Mikrotik mailing list
> > > [email protected]
> > > http://mail.butchevans.com/mailman/listinfo/mikrotik
> > >
> > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> > > RouterOS
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/82a7c3e3/attachment.html
> > >
> > _______________________________________________
> > Mikrotik mailing list
> > [email protected]
> > http://mail.butchevans.com/mailman/listinfo/mikrotik
> >
> > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> > RouterOS
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/0a0521c8/attachment.html
> >
> _______________________________________________
> Mikrotik mailing list
> [email protected]
> http://mail.butchevans.com/mailman/listinfo/mikrotik
>
> Visit http://blog.butchevans.com/ for tutorials related to Mikrotik
> RouterOS
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20140608/4dcc31a4/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik

Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS

Reply via email to