If you have a powerful MT at each site, EOIP will work. You might be able to do it with MPLS?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 15, 2014 at 12:05 PM, Paul McCall <[email protected]> wrote: > We will have a Gig connection between the two routers. Probably about > 300Mbit max going between them > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Josh Luthman > Sent: Tuesday, July 15, 2014 11:55 AM > To: Mikrotik discussions > Subject: Re: [Mikrotik] Best way to accomplish this... > > How much bandwidth? You could do an EOIP tunnel and be done in 17 seconds. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Tue, Jul 15, 2014 at 11:45 AM, Paul McCall <[email protected]> wrote: > > > To cut to the point, I have fiber going to a telco room and then ONE > > Cat5e cable running from there to a "connected" tower (single Cat5e) and > it's NOT > > practical to run a 2nd Cat5e between the two points. There is a Tik in > > the Telco Room and a Tik on the Tower Room, which has a routed block > > (OSPF) for customers. I need the following... > > > > To provide the "WAN feed" to the tower. > > To provide the routed block DOWN from the tower to the telco room, as > > I need to feed two physical segments that run off that subnet in the > > telco room. > > > > There are many concerns on why I can't change the topology of what I > > am doing and I can't re-ip anything... long story.. I have to use the > > same customer block at both the tower APs and for the telco room. > > > > I don't know if this is enough info... On our tower router, we will > have > > 3 WAN feeds total, and we bridge the other ports (for APs). So, I > > need to feed a single port with both the WAN AND have it > > "effectively" be part of the customer AP subnet bridge. > > > > I just haven't had enough time with VLANs to know if this can be done > > easily or whether I need to create a virtual interface(s) to get this > > accomplished. > > > > Paul McCall, Pres. > > PDMNet / Florida Broadband > > 658 Old Dixie Highway > > Vero Beach, FL 32962 > > 772-564-6800 office > > 772-473-0352 cell > > www.pdmnet.com<http://www.pdmnet.com/> > > [email protected]<mailto:[email protected]> > > > > -------------- next part -------------- An HTML attachment was > > scrubbed... > > URL: < > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20140715/db7 > > a25be/attachment.html > > > > > _______________________________________________ > > Mikrotik mailing list > > [email protected] > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > RouterOS > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mail.butchevans.com/pipermail/mikrotik/attachments/20140715/3bb10e1f/attachment.html > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20140715/b3fbd5a9/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
