Dhcp server and/or hotspot service needs moved to the bridge interface. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 16, 2014 7:19 PM, "ralph" <[email protected]> wrote:
> Having what seems like it is a rather silly problem and should be really > simple. > > > Have a remote hotspot and want to do some testing as if I was behind it, > but > don't want to drive 100 miles round trip. > > So I made an EOIP tunnel between the router the hotspot is on and the > router > at the office. On the office end, I made a bridge and assigned to it both > a > spare Ethernet port and the tunnel. On the hotspot end, I made a bridge > and > assigned to it both the LAN port the hotspot is on and the tunnel. The > tunnel is up. > > So It would seem that I could plug a pc into the port at the office and get > dhcp and hotspot service from the far end. > > However it isn't working. I just get nothing (except for the 169.x.x.x > windows default address) > > I realize I am not secure because I don't have the EOIP running over a pptp > tunnel, but I'm not concerned because this is temporary. > > What am I doing wrong? > > > Thanks, > Ralph > > > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Paul McCall > Sent: Tuesday, July 15, 2014 12:57 PM > To: Mikrotik discussions > Subject: Re: [Mikrotik] Best way to accomplish this... > > There is an 1100AHx2 at one end and a CRS226-24G-2S+RM at the other > presently. > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Josh Luthman > Sent: Tuesday, July 15, 2014 12:10 PM > To: Mikrotik discussions > Subject: Re: [Mikrotik] Best way to accomplish this... > > If you have a powerful MT at each site, EOIP will work. You might be able > to do it with MPLS? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > On Tue, Jul 15, 2014 at 12:05 PM, Paul McCall <[email protected]> wrote: > > > We will have a Gig connection between the two routers. Probably about > > 300Mbit max going between them > > > > -----Original Message----- > > From: [email protected] [mailto: > > [email protected]] On Behalf Of Josh Luthman > > Sent: Tuesday, July 15, 2014 11:55 AM > > To: Mikrotik discussions > > Subject: Re: [Mikrotik] Best way to accomplish this... > > > > How much bandwidth? You could do an EOIP tunnel and be done in 17 > seconds. > > > > > > Josh Luthman > > Office: 937-552-2340 > > Direct: 937-552-2343 > > 1100 Wayne St > > Suite 1337 > > Troy, OH 45373 > > > > > > On Tue, Jul 15, 2014 at 11:45 AM, Paul McCall <[email protected]> wrote: > > > > > To cut to the point, I have fiber going to a telco room and then ONE > > > Cat5e cable running from there to a "connected" tower (single Cat5e) > > > and > > it's NOT > > > practical to run a 2nd Cat5e between the two points. There is a Tik > in > > > the Telco Room and a Tik on the Tower Room, which has a routed block > > > (OSPF) for customers. I need the following... > > > > > > To provide the "WAN feed" to the tower. > > > To provide the routed block DOWN from the tower to the telco room, > > > as I need to feed two physical segments that run off that subnet in > > > the telco room. > > > > > > There are many concerns on why I can't change the topology of what I > > > am doing and I can't re-ip anything... long story.. I have to use > > > the same customer block at both the tower APs and for the telco room. > > > > > > I don't know if this is enough info... On our tower router, we will > > have > > > 3 WAN feeds total, and we bridge the other ports (for APs). So, I > > > need to feed a single port with both the WAN AND have it > > > "effectively" be part of the customer AP subnet bridge. > > > > > > I just haven't had enough time with VLANs to know if this can be > > > done easily or whether I need to create a virtual interface(s) to > > > get this accomplished. > > > > > > Paul McCall, Pres. > > > PDMNet / Florida Broadband > > > 658 Old Dixie Highway > > > Vero Beach, FL 32962 > > > 772-564-6800 office > > > 772-473-0352 cell > > > www.pdmnet.com<http://www.pdmnet.com/> > > > [email protected]<mailto:[email protected]> > > > > > > -------------- next part -------------- An HTML attachment was > > > scrubbed... > > > URL: < > > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20140715/d > > > b7 > > > a25be/attachment.html > > > > > > > _______________________________________________ > > > Mikrotik mailing list > > > [email protected] > > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > > RouterOS > > > > > -------------- next part -------------- An HTML attachment was > > scrubbed... > > URL: < > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20140715/3bb > > 10e1f/attachment.html > > > > > _______________________________________________ > > Mikrotik mailing list > > [email protected] > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > RouterOS _______________________________________________ > > Mikrotik mailing list > > [email protected] > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > RouterOS > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > < > http://mail.butchevans.com/pipermail/mikrotik/attachments/20140715/b3fbd5a9 > /attachment.html> > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20140716/f4c05d6e/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
