CCR 1036-12G-4S and CCR-1016
i´m running 6.18 and 6.19 .. without any problem .. (as i reported usign
<= 6.17 )
On 17/09/2014 21:01, Terri Kelley wrote:
Which CCR are you using for that? Also reading through the forums it seems that
OS version plays a roll. RouterOS 6.17 or .18 seem to be where you want to be.
Looks like newer versions introduce problems.
Terri Kelley
Network Engineer
254.697.6710
Farm to Market Broadband
-----Original Message-----
From: "Alexandre J. Correa (Onda)" <[email protected]>
To: Mikrotik discussions <[email protected]>
Sent: Wed, 17 Sep 2014 11:14 AM
Subject: Re: [Mikrotik] edge router
We use CCR with a traffic 987mb (limited by physical port).
12 BGP sessions + traffic (without conntrack).
Last week we added another to share this traffic, getting 700mb in one
and 400~500 in other..
know problems :
- changing routing filters, sometime not work... need to create another
filter (with same content) to work.
- show that some routes are advertised, but remote peer don´t received
it, creating other router-filter solved...
these two problems are related to 'routing filters' bug, for some
reason, the created filter stop working.. you can disable, enable..
change lines.. but don´t work.. only solve creating new filter with same
content....
On 17/09/2014 12:25, Keith Barber wrote:
I'm using CCR's for all my core routers. I've had one lock up on me twice in
about a year.
Haven't tried them in an edge capacity yet, still use Ciscos.
----- Original Message -----
From: "Terri Kelley" <[email protected]>
To: "Mikrotik discussions" <[email protected]>
Sent: Wednesday, September 17, 2014 10:20:08 AM
Subject: [Mikrotik] edge router
While setting up some monitors to my external bgp peers I found an intermittent
latency issue from my edge router running 5.22 to them. I peer with AT&T and
Time Warner off that edge. When I pull the cat5 and plug a lap top in, pings are
fine. Plug the edge back in and triple digit latency pops up every little bit. No
real pattern, only lasts a few pings then back to single digits. CPU not even close
to taxed, memory good, links look good and manually configured, full routing table
from both peers, RouterOS 5.22. I plan to update that to 5.26 just to see if there
is a difference. This router is an x86 PowerRouter 732 which was purchased quite
some time ago so pretty much would be one of first ready mades that came out. My
thinking is maybe I need to purchase something more up to date that is in use.
Thoughts and what are you guys using for an edge router? I seen CCRs mentioned
but seems like folks were having issues with them.
Terri Kelley
Network Engineer
254-697-6710
Farm to Market Broadband
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.butchevans.com/pipermail/mikrotik/attachments/20140917/f176159e/attachment.html>
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
--
Sds.
Alexandre Jeronimo Correa
Sócio-Administrador
Office: +55 34 3351 3077
Onda Internet
www.onda.net.br
_______________________________________________
Mikrotik mailing list
[email protected]
http://mail.butchevans.com/mailman/listinfo/mikrotik
Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
