No sir, no packet counting. Maybe I should have said, masquerade between Bri2 Lan to Bri1 Wan
I see the Nat tab but no masquerade. Any work around? Jerry Roy 949.681.5054 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Josh Luthman Sent: Tuesday, March 10, 2015 10:18 AM To: Mikrotik discussions Subject: Re: [Mikrotik] Nat a bridge interface? Are the rules counting packets? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Mar 10, 2015 at 1:13 PM, Roy, Jerry <[email protected]> wrote: > I did now, but same issue. > > > Jerry Roy 949.681.5054 > [email protected] > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Josh Luthman > Sent: Tuesday, March 10, 2015 10:03 AM > To: Mikrotik discussions > Subject: Re: [Mikrotik] Nat a bridge interface? > > Did you enable IP firewall for the bridge? > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Tue, Mar 10, 2015 at 1:00 PM, Roy, Jerry > <[email protected]> > wrote: > > > Hi Gentlemen, > > > > Should I be able to Nat between two bridge interfaces? I keep > > getting timed out when trying to ping 8.8.8.8 from the bridge 2 (ip > > 192.168.88.1) interface. > > > > /ip firewall filter > > add action=accept chain=input comment="Netgear Switch access" > > disabled=no src-address-list="Netgear Switch Access" > > add action=drop chain=input disabled=no dst-port=8443 protocol=tcp > > add action=accept chain=input comment="default configuration" > > disabled=no protocol=icmp add action=accept chain=input > > comment="default configuration" disabled=no > > dst-port=123 protocol=udp > > add action=accept chain=input comment="default configuration" > > connection-state=established disabled=no add action=accept > > chain=input comment="default configuration" > > connection-state=related disabled=no add action=accept chain=input > > comment="Allow Management from MNS" > > disabled=no dst-port=161 protocol=udp src-address=10.94.64.16/29 add > > action=accept chain=input disabled=no dst-port=22,80,443,8291 > > protocol=tcp src-address=10.94.64.16/29 add action=accept > > chain=input disabled=no dst-port=22,80,443,8291 protocol=tcp > > src-address=68.106.72.0/26 add action=accept chain=input disabled=no > > dst-port=22,80,443,8291 protocol=tcp src-address=68.106.76.203 add > > action=accept chain=input disabled=no dst-port=22,80,443,8291 > > protocol=tcp src-address=68.167.154.0/24 add action=accept > > chain=input disabled=no dst-port=22,80,443,8291 protocol=tcp > > src-address=162.93.0.0/16 add action=accept chain=input disabled=no > > dst-port=22,80,443,8291 protocol=tcp src-address=216.231.192.0/20 > > add action=accept chain=input comment="Used for VoIP Phone TS with > > Access Line VoIP provider. Must Be DISABLED at ALL times unless TS." > disabled=yes \ > > dst-port=80,443 protocol=tcp > > add action=drop chain=input comment="default configuration" > > disabled=no > > in-interface=bridge1 > > /ip firewall nat > > add action=masquerade chain=srcnat comment="default configuration" > > disabled=no dst-address=0.0.0.0/0 src-address=192.168.88.0/24 > > to-addresses=\ > > 0.0.0.0 > > > > Thanks, > > > > Jerry > > -------------- next part -------------- An HTML attachment was > > scrubbed... > > URL: < > > http://mail.butchevans.com/pipermail/mikrotik/attachments/20150310/c > > 55 > > 23a3e/attachment.html > > > > > _______________________________________________ > > Mikrotik mailing list > > [email protected] > > http://mail.butchevans.com/mailman/listinfo/mikrotik > > > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > > RouterOS > > > -------------- next part -------------- An HTML attachment was > scrubbed... > URL: < > http://mail.butchevans.com/pipermail/mikrotik/attachments/20150310/cc1 > f4de7/attachment.html > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik > RouterOS > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20150310/08934ded/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
