Using a CCR1036-12G-4S with 6.18. I see a few errors on the RX side on one interface. Blank on the others. Guess if nothing showing then there were none.
Terri Kelley Network Engineer Farm to Market Broadband On Apr 13, 2015, at 6:22 PM, Ralph wrote: > Now that the list is working again, I have a question. > > I replaced my old x86 based edge router at the data center with a CCR. My > upstream said they were seeing some errors and I went to check the > interfaces screen in Winbox to see what was going on. Well there is no > error readout any longer. > > I think it must a V6.x thing because of all the ones I tested, here are the > results. > > RB433 6.17 no > RB750gl 6.17 no > CCR1036-12g-4s 6.27 no > 750up 6.27 no > RB2011 5.25 yes > x86 4.16 yes > 750g 4.11 yes > 2011uas 5.25 yes > 750g 5.26 yes > 2011uas 5.25 yes > 750g 5.4 yes > 750g 5.21 yes > 750gl 5.25 yes > 750up 5.9 yes > 433ah 4.3 yes > > I scanned the release notes and saw nothing. > Has this bug been reported? I call it a bug because WHY in the world would > that need to be removed? > > Ralph > > > > --- > This email is free from viruses and malware because avast! Antivirus > protection is active. > http://www.avast.com > > > _______________________________________________ > Mikrotik mailing list > [email protected] > http://mail.butchevans.com/mailman/listinfo/mikrotik > > Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.butchevans.com/pipermail/mikrotik/attachments/20150413/99e93ce3/attachment.html> _______________________________________________ Mikrotik mailing list [email protected] http://mail.butchevans.com/mailman/listinfo/mikrotik Visit http://blog.butchevans.com/ for tutorials related to Mikrotik RouterOS
