On Wednesday, December 15, 1999
nurazmi <[EMAIL PROTECTED]> wrote :
> kalo ada temen-teman yang tahu, please kasi jawaban ya soalnya gue lagi butuh nich,
> makasih ya
The correct pinouts for a 10Base-T twisted pair crossover cable are:
��������TX+ 1 to 3 RX+
��������TX- 2 to 6 RX-
��������RX+ 3 to 1 TX+
��������RX- 6 to 2 TX-
Pinouts for a 100Base-TX crossover twisted pair Ethernet cable are:
NOTE: Crossover cable can be used but is unsupported at 100 Mbps
^^^^^^^^^^^^^^
1. Pins 1 & 2 must be of the same twisted strand
2. Pins 3 & 6 must be of the same twisted strand
3. Pins 4, 5, 7, 8 are not used in 100Base-TX
4. Maximum distance for 100Base-TX cabling is 100 meters
5. The cabling must be Category 5
For example:
White/Blue TX+ 1 to 3 RX+ White/Blue
Blue TX- 2 to 6 RX- Blue
White/Brown RX+ 3 to 1 TX+ White/Brown
������������������������4 to 4 Not used
������������������������5 to 5 Not used
Brown RX- 6 to 2 TX- Brown
������������������������7 to 7 Not used
������������������������8 to 8 Not used
itu yg dulu saya dapet dari site :
http://knowledgebase.3com.com
Best regards,
Trikom Labs.
http://www.indolinux.com - Nikmati Layanan Personal INDOLINUX ::
http://techscape.net/ - Webhosting: Dual T3 on Dual Pentium III 450Mhz
Only US$1.95/month -> CGI SSL 5MB Unlimited Traffic & Mail FP2000
-------------------------------------------------------------------
untuk berhenti kirim email ke [EMAIL PROTECTED]
untuk melihat peraturan kirim email ke [EMAIL PROTECTED]
arsip berada di http://www.mail-archive.com/[email protected]
