ini yang ditampilkan ketika pakai wvdialconf ============================================ Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S2 S3 S4 S5 S6 S7 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <[email protected]>. ========================================== adakah yang bisa memberikan pencerahan Teriam kasih Wassalam, bn ________________________________ From: [email protected] on behalf of Bagus Nugroho Sent: Fri 12-Jun-2009 05:08 To: Mailing List Komunitas openSUSE Indonesia Subject: [*openSUSE-ID*] Modem CDM SRT-2008 nggak ke-detek Bro 'n Sis, openSuse-ku nggak nge-detek modem CDMA SRT-2008 nih aku pakai wvdialconf nemunya "No Modem found"(atau semacam itulah) Gimana ya solusi-nya ... aku googling ketemuannya problem standar dan nggak jalan juga. Terima kasih Wassalam, bn _______________________________________________ milis mailing list [email protected] http://lists.opensuse-id.org/listinfo.cgi/milis-opensuse-id.org
