untuk isi acces point namenya d mana dong?
On 7/21/09, Didiet Agus Pambudiono <[email protected]> wrote: > pake perintah wvdial, pertama ketik wvdialconf (# --> tanda sebagai user > root) > #wvidalconf (enter) > akan keluar seperti ini : > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > Modem Port Scan<*1>: S0 S1 S2 S3 > ttyS4<Info>: No such device or address > Modem Port Scan<*1>: S4 > ttyS5<Info>: No such device or address > Modem Port Scan<*1>: S5 > ttyS6<Info>: No such device or address > Modem Port Scan<*1>: S6 > ttyS7<Info>: No such device or address > Modem Port Scan<*1>: S7 > WvModem<*1>: Cannot get information for serial port. > ttyUSB0<*1>: ATQ0 V1 E1 -- OK > ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK > ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttyUSB0<*1>: Modem Identifier: ATI -- MC8781 > ttyUSB0<*1>: Speed 9600: AT -- OK > ttyUSB0<*1>: Max speed is 9600; that should be safe. > ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > WvModem<*1>: Cannot get information for serial port. > ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud > ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > WvModem<*1>: Cannot get information for serial port. > ttyUSB2<*1>: ATQ0 V1 E1 -- OK > ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK > ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK > ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: Sierra Wireless, Inc. > ttyUSB2<*1>: Speed 9600: AT -- OK > ttyUSB2<*1>: Max speed is 9600; that should be safe. > ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > Found a modem on /dev/ttyUSB0. > Modem configuration written to /etc/wvdial.conf. > ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > > Berarti modem telah dikenali di /dev/ttyUSB0 > > kemudian edit file /etc/wvdial.conf > #vim /etc/wvidal.conf > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem = /dev/ttyUSB0 > Phone = 0 > Idle Seconds = 300 > Modem Type = Analog Modem > Stupid Mode = 1 > Compuserve = 0 > Baud = 9600 > Auto DNS = 1 > Dial Command = ATDT > Ask Password = 0 > ISDN = 0 > ; Password = <Your Password> > ; Username = <Your Login Name> > > tinggal ganti : > Phone = nomor telp yang akan didial > Password dan usernamnenya, jangan lupa tanda ; dihilangkan > Pada 21 Juli 2009 15:15, veri arinal <[email protected]> menulis: > >> Yth, >> Pakar opensuse >> >> saya baru beli NOVATEL MC930D HSUPA USB MODEM >> dan udah di uji coba pake windows sipenjual. >> >> pertanyaannya saya pake os opensuse 11.1, modem ini plug and play juga >> nga seperti layaknya windows? atau harus install driver for opensuse? >> >> ada yang punya pengalaman pake modem ini di suse? >> >> salam hangat >> veri >> >> >> >> ______________________________________________ >> --- >> Info Milis : http://opensuse.or.id/milis >> Keluar dari Milis : Kirim email ke [email protected] >> Manajemen Keanggotaan : >> http://lists.opensuse-id.org/listinfo.cgi/milis-opensuse-id.org >> > ______________________________________________ > --- > Info Milis : http://opensuse.or.id/milis > Keluar dari Milis : Kirim email ke [email protected] > Manajemen Keanggotaan : > http://lists.opensuse-id.org/listinfo.cgi/milis-opensuse-id.org > ______________________________________________ --- Info Milis : http://opensuse.or.id/milis Keluar dari Milis : Kirim email ke [email protected] Manajemen Keanggotaan : http://lists.opensuse-id.org/listinfo.cgi/milis-opensuse-id.org
