Jonas, I had a similar problem - I hade the debug level set to 10, greylisting enabled, and the DB file exists, is writable, and has been updated to have a size of 4096 bytes, but has no apparent entries either from "od -c" or from a modified version of the database cleaner utility (had to remove O_EXLOCK to get it to work, as the Debian package doesn't have it), which prints the key and record count as it scans the file. There's also no count from your graphing package.
I also get no indication in any of my system logs that greylisting is occurring. The solution was simple once I had found it - the top of the "filter_recipient" subroutine clearly says "# Requires -t", which means that you have to either pass the "-t" parameter on the command line, or in the multiplexor configuration, enable the recipient check - by default it is disabled. Now that this has been changed and the multiplexor and filters shutdown and restarted, it all works as expected. Best Wishes, Paul. __________________________________________________ Paul Murphy Head of Informatics Ionix Pharmaceuticals Ltd 418 Science Park, Cambridge, CB4 0PA Tel. 01223 433741 Fax. 01223 433788 _______________________________________________________________________ DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you have received this email in error please contact the sender or the Ionix IT Helpdesk on +44 (0) 1223 433741 _______________________________________________________________________
_______________________________________________ Visit http://www.mimedefang.org and http://www.canit.ca MIMEDefang mailing list [EMAIL PROTECTED] http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
