Hi, I'm rebuilding my primary MX, and I've been trialling MIMEDefang on my secondary MX. So I duplicated the bulk of the config from my secondary MX to my (yet to be commissioned) new primary MX.
I get the following: mimedefang-multiplexor: Starting slave 0 (pid 3075) (1 running): About to perform scan mimedefang-multiplexor: Slave 0 stderr: MIME::Parser: can't open tmpfile: Invalid argument mimedefang-multiplexor: Slave 0 died prematurely -- check your filter rules mimedefang[1871]: Error from multiplexor: ERR No response from slave sm-mta[3062]: i5T7K1sb003062: Milter: data, reject=451 4.7.1 Please try again later Google has shown a couple of previous instances on this list, but my setup doesn't seem to be the same as these previous problems. I can't work out how to crank out some more debugging, which is what I ideally want to do. I'm running MIMEDefang 2.41 and Sendmail 8.12.11 (on both the secondary MX, which works, and the new primary MX, which exhibits the above). mimedefang.pl -test is happy mimedefang.pl -structure doesn't complain mimedefang.pl -prettyprint spits back an email message if I give it one So I don't feel that there is anything wrong with my mimedefang-filter (as it's the same as the one that works on my secondary MX). A big difference was a 2.6 kernel, as the primary is running 2.6.6 and the secondary 2.4.26, so I booted into a 2.4.26 kernel on the primary MX and the problem persisted, so it's not some bizarre tempfile problem. I guess the next step is an uber strace... I'd appreciate any suggestions. regards Andrew _______________________________________________ Visit http://www.mimedefang.org and http://www.canit.ca MIMEDefang mailing list [EMAIL PROTECTED] http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
