netstat -t shows none netsatt -p shows tcp 0 0 0.0.0.0:10025 0.0.0.0:* LISTEN 18192/mimedefang
lsof shows mimedefan 18192 defang 5u IPv4 23134088 0t0 TCP *:10025 (LISTEN) Larry G. Wapnitsky MBA, MCSE, MCP+I IT SUPPORT & ADMINISTRATION COORDINATOR WRT | Wallace Roberts & Todd, LLC 1700 Market Street, 28th Fl Philadelphia, PA 19103 T 215.430.5068 C 215.713.8635 E [email protected] -----Original Message----- From: Philip Prindeville [mailto:[email protected]] Sent: Wednesday, November 09, 2011 4:57 PM To: Larry G. Wapnitsky Subject: Re: [Mimedefang] 450 4.7.1 error using Postfix/MIMEDefang/milter-manager Ok, and does "netstat -t" or "lsof" show any listener on port 10025? On 11/9/11 1:54 PM, Larry G. Wapnitsky wrote: > Same error > > Larry G. Wapnitsky MBA, MCSE, MCP+I > IT SUPPORT & ADMINISTRATION COORDINATOR WRT | Wallace Roberts & > Todd, LLC > 1700 Market Street, 28th Fl > Philadelphia, PA 19103 > T 215.430.5068 > C 215.713.8635 > E [email protected] > > > -----Original Message----- > From: Philip Prindeville [mailto:[email protected]] > Sent: Wednesday, November 09, 2011 3:38 PM > To: Larry G. Wapnitsky > Subject: Re: [Mimedefang] 450 4.7.1 error using > Postfix/MIMEDefang/milter-manager > > Just out of curiosity, what happens if you type: > > mail from:<root> > > instead, or even: > > mail from:<[email protected]> > > > On 11/9/11 8:25 AM, Larry G. Wapnitsky wrote: >> I'm running PF 2.7.1 with milter-manager handling my milters. I have >> MIMEDefang configured as one of the managed milters, but when I >> telnet to port 25 for testing, I receive the following: >> >> root@mailproc:/etc/milter-manager# telnet localhost 25 Trying >> 127.0.0.1... >> Connected to localhost. >> Escape character is '^]'. >> 220 mailproc.domain.com ESMTP Postfix (Debian/GNU) helo test >> 250 mailproc.domain.com >> mail from: root >> 451 4.7.1 Service unavailable - try again later >> 421 4.4.2 mailproc.domain.com Error: timeout exceeded Connection >> closed by foreign host. >> root@mailproc:/etc/milter-manager# >> >> The only changes I've made to the default mimedefang configuration at >> /etc/default/mimedefang are: >> >> SOCKET=inet:10025 >> SYSLOG_FACILITY=mail >> >> And my milter-manager.local.conf has only one entry consisting of: >> >> define_milter("mimedefang") do |milter| >> milter.description = "MIMEDefang" >> milter.connection_spec = "inet:10025@localhost" >> milter.fallback_status = "accept" >> milter.enabled = true >> end >> >> >> I've added the following to master.cf: >> >> >> scan unix - - n - 10 smtp >> -o smtp_send_xforward_command=yes >> -o disable_mime_output_conversion=yes >> -o smtp_generic_maps= >> >> >> And this to main.cf: >> >> smtpd_milters = unix:/milter-manager/milter-manager.sock >> >> milter_default_action = accept >> milter_protocol = 6 >> milter_mail_macros = {auth_author} {auth_type} {auth_authen} >> >> Any help would be greatly appreciated. FYI - this is my first >> experience with milters, and I've read tons of documentation but >> haven't been able to diagnose this yet. >> >> Thanks, >> >> Larry > > > > ----wrtmail--%3423wrt%---- ----wrtmail--%3423wrt%---- _______________________________________________ NOTE: If there is a disclaimer or other legal boilerplate in the above message, it is NULL AND VOID. You may ignore it. Visit http://www.mimedefang.org and http://www.roaringpenguin.com MIMEDefang mailing list [email protected] http://lists.roaringpenguin.com/mailman/listinfo/mimedefang
