When I test wired lan, i just used ifconfig command. At that time, ping6 works.
But MN still MN cannot progress over '5'.
Please let me know why?
2006/4/18, Yoonjung Ha <[EMAIL PROTECTED]>:
I was very happy to see this document. But I have some questions about it.1. Because I don't have wireless environment yet, I didn't do first line and I did same remained lines for MN and HA. But the ping to site address eachother doesnt work. why?#iwconfig eth0 mode ad-hoc essid homenet enc off
#ifconfig eth0 inet6 add fec0:106:2700::4/64
#echo 0 > /proc/sys/net/ipv6/conf/eth0/forwarding
#echo 1 > /proc/sys/net/ipv6/conf/eth0/autoconf
#echo 1 > /proc/sys/net/ipv6/conf/eth0/accept_ra
#echo 1 > /proc/sys/net/ipv6/conf/eth0/accept_redirects
2. Configuring radvd on HA --> #ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:90:7D:F3:03:1A
inet6 addr: fec0:106:2700:: 4/64 Scope:SiteIt looks wrong, because HA address was fec0:106:2700::2/64And I did same thing, but I cannot see 'A new (superfluous) autogenerated address'3. I guess because ping was not sucessful. Anyway , after starting MN, '5' is end of my process for MN.
2006/4/18, Lars Strand <[EMAIL PROTECTED]>:The MIP6v6 HOWTO is in the process of beeing upgraded to v2.0.
The work-in-progress draft can be found here:
http://gnist.org/~lars/doc/Mobile-IPv6-HOWTO/Mobile-IPv6-HOWTO.html
Please disregard any spelling errors at this stage.
Any other comments are highly welcome!
--
Lars Strand
GnuPG/PGP Key: http://www.gnist.org/~lars/pubkey.asc ID: 972F4325
"The Internet? Is that thing still around?" -- Homer Simpson
_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
_______________________________________________ mipl mailing list [email protected] http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
