Hello all, I have installed and run MIPL 2.0.2 on our testbed and everything works fine:
Our testbed architecture is similar to the one pictured in the MIPL HOWTO, except that everything is wired, addresses are global and HA serves also as the home router (R). We also use CN as a part of the Home subnet. Everything run on Fedora Core 5, kernel 2.6.16.22 (patched where necessary).
I made some handover tests with the "default" configuration and everything worked as I expected. Now I tried to use MN with two interfaces to see what functionality it can provide to us, but I wasn't able to run it properly. I think, that I don't fully understand how should it work. So I have some questions to this:
1) When I create two "Interface" records and two "HomeLink" records in the mip6d.conf, does it create two different MNs or just one using both interfaces?
2) What addresses should be written in the "HomeAddress" sections in the MnHomelink records for each interface? Can I use the same addresses even if the "real" interface addresses are different?
3) Is it possible to use these two interfaces for "lazy" MN handover like this?: a) eth0 is connected to the Home Network, eth1 is disconnected b) eth1 connects to the visited network c) eth0 disconnects from the home network e) communication with CN is not disrupted, but now goes through the eth1 Thanks in advance for any answer. Regards, Michal _______________________________________________ mipl mailing list [email protected] http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl
