Hello all,
Now I'm trying to integrate the WLAN modules in my present MIPv6 testbed,and got some problems which I want to seek answers as soon as possible.
 
The testbed is based on the linux kernel version 2.6.15.7:
(visitnet)                                                                                                                                (homenet)        
 (eth1) CN-[eth0]-------------------------------[eth1]-Route-[eth2]-----------------------------[eth0]-HA (wlan0)
            (Network 1:2001:106:2300::/64)                       (Network 2:2001:106:2700::/64)
 
                                                                    
                                                                           MN (eth1)
 
I have installed wireless  cards on 3 hosts (MN,HA,CN)and wish to communicate on an ad-hoc mode.
Wireless Interfaces:
CN:  eth1  2001:106:2300::3/64
MN:  eth1  2001:106:2300::4/64
HA: wlan0 2001:106:2700::3/64
Information of my 3 hosts are:
MN:ubuntu,linux-kernel:2.6.15.7,Intel Corporation PRO/Wireless LAN 2100 3B
Mini PCI Adapter
HA:Debian,linux-kernel:2.6.15.7,(USB wireless adapter)Wireless Model Name:ZyAIR G-220
zd1211-http://zd1211.ath.cx/ -r83 Based on www.zydas.com.tw driver version
2.5.0.0
CN:Debian,linux-kernel:2.6.15.7,PCICMA wlan card,realtekRTL8185,Hermes
Problems:
1.I set the essid of HA as "homenet" (iwconfig wlan0 mode ad-hoc essid homenet enc off),CN as "visitnet".
2.Running iwlist to view available frequencies or channels states that,MN,CN and HA and only find "visitnet",but cannot find "homenet" at all,so that MN cannot connect with HA.
3.I connected MN with CN,(iwconfig eth1 essid visitnet),but they cannot ping each other.Also Route cannot ping the wireless interface eth1 of CN and wlan0 of HA.
 
Following is some iwconfig information:
home-agent:#iwconfig
wlan0     802.11b/g NIC  ESSID:"homenet"
          Mode:Ad-Hoc  Frequency:2.412 GHz  Cell:22:BC:2C:5C:4D:A6
          Bit Rate=11 Mb/s
          Retry:off  RTS thr=2432 B   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=100/100  Signal level=55/100 Noise level=0/100
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:411
          Tx excessive retries:25  Invalid misc:0   Missed beacon:0

mobile-node:/#iwconfig
eth1      IEEE 802.11b  ESSID:"visitnet"  Nickname:"ipw2100"
          Mode:Ad-Hoc  Frequency:2.412 GHz  Cell: 02:04:23:B3:34:39
          Bit Rate=0 kb/s   Tx-Power:off
          Retry min limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=76/100  Signal level=-79 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Corr-Node:#iwconfig
eth1      IEEE 802.11b  ESSID:"visitnet"  Nickname:"HERMES I"
          Mode:Ad-Hoc  Frequency:2.412 GHz  Cell: 02:04:23:B3:34:39
          Bit Rate=2 Mb/s   Sensitivity:1/3
          Retry min limit:4   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=0  Signal level:0 Noise level:0
          Rx invalid nwid:0 Rx invalid crypt:2  Rx invalid frag:1028
          Tx excessive retries:67  Invalid misc:0   Missed beacon:0

mobile node:/# ping6 2001:106:2300::3
PING 2001:106:2300::3(2001:106:2300::3) 56 data bytes
From 2001:106:2300::4 icmp_seq=1 Destination unreachable: Address unreachable
From 2001:106:2300::4 icmp_seq=2 Destination unreachable: Address unreachable


Any ideas would be greatly appreciated!!!

Regards
 
Tian
Add FUN to your email - CLICK HERE!
_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl

Reply via email to