hi Ryan,

Like Biran mentioned, the problem is with the site
local address. Support for site local address has been
abolished.

Also do check your IPSecurity settings!

shariq

--- Ryan Measel <[EMAIL PROTECTED]> wrote:

> I have setup a "moving" testbed where I can walk the
> mobile nodes
> between two networks: homenet and visitnet.  The
> mobile node will
> start up and 'mn_move' into the home network.  Then,
> when the node
> goes out of range of the home network and into the
> foreign network, it
> will not "move."  In the debug, the default router
> for the mobile node
> will expire, but it will not attempt to bind a new
> address.  Router
> advertisements are sent out by both the home agent
> and the foreign
> router.  They are received by the mobile node and
> the routes for the
> mobile node are updated.  Yet, it doesn't switch
> networks.
> 
> I've attached the debug output from the mobile node,
> the configuration
> files from the mobile node and home agent as well as
> the radvd.conf
> for the home agent.
> 
> I would greatly appreciate any help.
> 
> Cheers,
> Ryan
> 
> Mobile Node Configuration file:
> ======================
> 
>          # Mobile IPv6 configuration file: Mobile
> Node
>          #
>          # filename: /etc/mip6d.conf
> 
>          NodeConfig MN;
> 
>          ## If set to > 0, will not detach from tty
>          DebugLevel 10;
> 
>          MnDiscardHaParamProb enabled;
> 
>         Interface "ath0";
> 
>         DoRouteOptimizationCN enabled;
> 
>         DoRouteOptimizationMN enabled;
> 
>         UseCnBuAck enabled;
> 
>          MnHomeLink "ath0" {
>                  HomeAgentAddress fec0:106:2700::2;
>                  HomeAddress fec0:106:2700::4/64;
>          }
> 
>          ##
>          ## IPsec configuration
>          ##
> 
>         UseMnHaIPsec enabled;
> 
>         IPsecPolicySet {
>               HomeAgentAddress fec0:106:2700::2;
>               HomeAddress fec0:106:2700::4/64;
> 
>                  IPsecPolicy HomeRegBinding UseESP;
>                 IPsecPolicy MobPfxDisc UseESP;
>                  IPsecPolicy TunnelMh UseESP;
>          }
> ====================
> 
> 
> 
> Home Agent Configuration File
> ====================
>          # Mobile IPv6 configuration file: Home
> Agent
>          #
>          # filename: /etc/mip6d.conf
> 
>          NodeConfig HA;
> 
>          ## If set to > 0, will not detach from tty
>          DebugLevel 10;
> 
>          ## List of interfaces where we serve as
> Home Agent
>          Interface "ath0";
> 
>          UseMnHaIPsec enabled;
> 
>          IPsecPolicySet {
>                       HomeAgentAddress
> fec0:106:2700::2;
> 
>                       HomeAddress
> fec0:106:2700::4/64;
> 
>                       IPsecPolicy HomeRegBinding
> UseESP;
>                       IPsecPolicy TunnelMh UseESP;
>               }
> ===================================
> 
> 
> Home Agent radvd.conf
> ===================================
> interface ath0{
>         AdvSendAdvert on;
>         MaxRtrAdvInterval 2;
>         MinRtrAdvInterval 1;
>         AdvHomeAgentFlag on;
>         HomeAgentLifetime 10000;
>         HomeAgentPreference 20;
>         AdvHomeAgentInfo on;
>         prefix fec0:106:2700::4/64
>         {
>                 AdvRouterAddr on;
>                 AdvOnLink on;
>                 AdvAutonomous on;
>         };
> };
> ==================================
> 
> 
> Mobile Node Debug Output
> ==================================
> 
> mip6d[7246]: MIPL Mobile IPv6 for Linux v2.0.2
> started (Mobile Node)
> main: MIPL Mobile IPv6 for Linux started in debug
> mode, not detaching
> from terminal
> conf_show: config_file = mipv6/mobile-node-config.sh
> conf_show: vt_hostname = localhost
> conf_show: vt_service = 7777
> conf_show: mip6_entity = 1
> conf_show: debug_level = 10
> conf_show: PolicyModulePath = [internal]
> conf_show: DefaultBindingAclPolicy = 0
> conf_show: NonVolatileBindingCache = disabled
> conf_show: KeyMngMobCapability = disabled
> conf_show: UseMnHaIPsec = enabled
> conf_show: MnMaxHaBindingLife = 262140
> conf_show: MnMaxCnBindingLife = 420
> conf_show: MnRouterProbes = 0
> conf_show: MnRouterProbeTimeout = 0.000000
> conf_show: InitialBindackTimeoutFirstReg = 1.500000
> conf_show: InitialBindackTimeoutReReg = 1.000000
> conf_show: UseCnBuAck = enabled
> conf_show: DoRouteOptimizationMN = enabled
> conf_show: MnUseAllInterfaces = disabled
> conf_show: MnDiscardHaParamProb = enabled
> conf_show: SendMobPfxSols = enabled
> conf_show: OptimisticHandoff = disabled
> conf_show: SendMobPfxAdvs = enabled
> conf_show: SendUnsolMobPfxAdvs = enabled
> conf_show: MaxMobPfxAdvInterval = 86400
> conf_show: MinMobPfxAdvInterval = 600
> conf_show: HaMaxBindingLife = 262140
> conf_show: DoRouteOptimizationCN = enabled
> xfrm_cn_init: Adding policies and states for CN
> xfrm_mn_init: Adding policies and states for MN
> conf_home_addr_info: HoA address
> fec0:106:2700:0:0:0:0:4
> conf_home_addr_info: HA address
> fec0:106:2700:0:0:0:0:2
> __tunnel_add: created tunnel ip6tnl1 (9) from
> fec0:106:2700:0:0:0:0:4
> to fec0:106:2700:0:0:0:0:2 user count 1
> conf_home_addr_info: Home address
> fec0:106:2700:0:0:0:0:4
> flag_hoa: set HoA fec0:106:2700:0:0:0:0:4/128 iif 9
> flags 10
> preferred_time 4294967295 valid_time 4294967295
> conf_home_addr_info: Added new home_addr_info
> successfully
> __md_discover_router: discover link on iface ath0
> (6)
> md_change_default_router: add new router
> fe80:0:0:0:218:39ff:fe7a:9a96
> on interface ath0 (6)
> md_change_default_router: add new router
> fe80:0:0:0:240:96ff:fea8:7162
> on interface ath0 (6)
> md_expire_router: expiring router
> fe80:0:0:0:218:39ff:fe7a:9a96 on
> iface ath0 (6)
> mn_addr_do_dad: DAD succeeded!
> mn_move: 1535
> mn_move: in home net
> mv_hoa: move HoA fec0:106:2700:0:0:0:0:4/64 from
> iface 9 to 6
> md_change_default_router: add new router
> fe80:0:0:0:218:39ff:fe7a:9a96
> on interface ath0 (6)
> md_expire_router: expiring router
> fe80:0:0:0:240:96ff:fea8:7162 on
> 
=== message truncated ===



 
____________________________________________________________________________________
Bored stiff? Loosen up... 
Download and play hundreds of games for free on Yahoo! Games.
http://games.yahoo.com/games/front

_______________________________________________
mipl mailing list
[email protected]
http://www.mobile-ipv6.org/cgi-bin/mailman/listinfo/mipl

Reply via email to