Hi Dima,
somehow it should work using the components from 3MX distribution.
I tried a little but could get it running due to less time .
Currently i use the value in /proc file system to get battery status:
cat /proc/jz/battery-level
=> the value provided reflects the battery status.
a value > 220 is a full battery
a value < 200 battery is getting empty.
hope this helps a little
Regarding ScreenBrightness:
as far as i know this can't be set on the console since its a fixed time
period set in the kernel.
This means after some period of inactivity the screen is switched off -
of course your letux is still running ;-)
Regards
... Wolfgang
On 9/18/2012 1:48 PM, Dima wrote:
Hi.
I have a Letux400 with a Debian Lenny system (2.6.24.3 kernel).
How is battery charge level queried on this system? Is there some
command line tool ?
If this system does not support this, does a later
kernel do?
Thanks,
Dima.
_______________________________________________
Mipsbook-devel mailing list
Mipsbook-devel@linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
_______________________________________________
Mipsbook-devel mailing list
Mipsbook-devel@linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/mipsbook-devel
