On 5/1/05, Monah Baki <[EMAIL PROTECTED]> wrote: > I decided to add another interface xl1. > All of a sudden I get the following error:
Are you sure that the correct cable leads to the correct interface? OpenBSD may very well detect the cards in an order different from what you expect. In other words: xl1 may or may not be the newly added card. > xl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 <snip> > status: no carrier > inet 192.168.3.1 netmask 0xffffff00 broadcast 192.168.3.255 <snip> > all my internal computers can't ping 192.168.3.1. Which is hardly surprising, considering the system does not detect a carrier on xl1 as it does on xl0. Verify that the cables and interfaces match. Hope this helps, Rogier -- If you don't know where you're going, any road will get you there.
