Hello,
I just purchased a Buffalo WLI-U2-KG54-AI for my Dell Latitude D800
laptop. I upgraded to OpenBSD 3.7, rebuilt my kernel (for ntfs support)
and plugged in the device. The small storage area is detected but no
wireless stuff is found.
I've enclosed my dmesg for my GENERIC kernel with only ntfs support added
in.
--
Jyry Suuntala
<[EMAIL PROTECTED]>
OpenBSD 3.7 (GENERIC) #0: Sun May 22 16:20:02 EEST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 2000 MHz (1340 mV): speeds: 2000, 1800, 1600, 1400,
1200, 1000, 800, 600 MHz
real mem = 1072988160 (1047840K)
avail mem = 972566528 (949772K)
using 4278 buffers containing 53751808 bytes (52492K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/03/04, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc580/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "Nvidia", unknown product 0x031b rev 0xa1
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: single transaction translator
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5705M" rev 0x01, BCM5705 A1
(0x3001): irq 11 address 00:0f:1f:29:5e:43
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 1
cbb0 at pci2 dev 1 function 0 "Texas Instruments PCI7510 CardBus" rev 0x01: irq
11
cbb1 at pci2 dev 1 function 1 "Texas Instruments PCI7610 CardBus (Smart Card
mode)" rev 0x01: irq 11
"Texas Instruments PCI7(4-6)10 FireWire" rev 0x00 at pci2 dev 1 function 2 not
configured
vendor "Texas Instruments", unknown product 0x8204 (class system subclass
miscellaneous, rev 0x00) at pci2 dev 1 function 3 not configured
"Broadcom BCM4306" rev 0x03 at pci2 dev 3 function 0 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2060AH>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-6100A, 104D> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, ICH4
AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ef65 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
"TEXAS Instruments, UltraMedia Smart Card Adapter, 1.0" (manufacturer 0x97,
product 0x1620) at pcmcia1 function 0 not configured
uhidev0 at uhub3 port 3 configuration 1 interface 0
uhidev0: BUFFALO WLI-U2-KG54-AI, rev 2.00/1.15, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
ugen0 at uhub0 port 2
ugen0: Dell product 0x8010, rev 1.10/5.64, addr 2
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhidev0: at uhub3 port 3 (addr 2) disconnected
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
umass0 at uhub3 port 3 configuration 1 interface 0
umass0: BUFFALO WLI-U2-KG54-AI, rev 2.00/1.15, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
cd1 at scsibus1 targ 1 lun 0: <BUFFALO, WLI-U2-KG54-CD, 1.00> SCSI0 5/cdrom
removable
auich0: measured ac97 link rate at 48008 Hz, will use 48000 Hz
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/19.00, addr 2, iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse1 at ums0 mux 0
