Hi,
I have a very strange problem upon booting with OpenBSD-3.7.
I have a USB HD plugged-in my box. My bios is setup to boot only from
HDD0 which is an internal IDE drive (I tried all different combinations,
but the problem is always the same).
On booting, if the USB HD is turned off, everything works fine, but if
it is turned on, then the box won't boot, it just hangs before the boot>
prompt at:
hd0+ hd1+
If I then turn the USB HD off, then the boot continues. Any idea how to
solve this ?
Thanks in advance.
Antoine
ps : more info,
# disklabel sd0
# using MBR partition 3: type A6 off 63 (0x3f) size 241248042 (0xe61272a)
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: AVV207-0
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 117800
total sectors: 241254720
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize cpg]
c: 241248042 63 unused 0 0 # Cyl
0*-117796*
d: 241248042 63 4.2BSD 2048 16384 16 # Cyl
0*-117796*
OpenBSD 3.7-current (GENERIC) #175: Fri Jun 3 18:00:08 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.40GHz ("GenuineIntel" 686-class) 2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 670605312 (654888K)
avail mem = 604360704 (590196K)
using 4278 buffers containing 33632256 bytes (32844K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(60) BIOS, date 03/02/04, BIOS32 rev. 0 @ 0xfb220
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf84
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 3 5 9 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x400
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82845G/GL/GV/GE/PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci2 at ppb1 bus 2
rl0 at pci2 dev 0 function 0 "Realtek 8139" rev 0x10: irq 10 address
00:50:8d:54:f5:17
rlphy0 at rl0 phy 0: RTL internal phy
bktr0 at pci2 dev 4 function 0 "Brooktree BT878" rev 0x11: irq 3
bktr0: Hauppauge Model 44806 D143
bktr0: Warning - Unknown Hauppauge Tuner 0x2b
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
"Brooktree BT878 Audio" rev 0x11 at pci2 dev 4 function 1 not configured
pcscp0 at pci2 dev 5 function 0 "AMD 53c974 PCscsi-PCI" rev 0x10: irq 11
pcscp0: AM53C974, 40MHz, SCSI ID 7
pcscp0: SCSI bus reset
scsibus0 at pcscp0: 8 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1007> SCSI2
5/cdrom removable
cd1 at scsibus0 targ 5 lun 0: <HP, CD-Writer+ 9200, 1.0e> SCSI4 5/cdrom
removable
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC35L030AVER07-0>
wd0: 16-sector PIO, LBA, 28613MB, 58600080 sectors
wd1 at pciide0 channel 0 drive 1: <ST380011A>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
wd2 at pciide0 channel 1 drive 0: <IBM-DTLA-307030>
wd2: 16-sector PIO, LBA, 29314MB, 60036480 sectors
wd3 at pciide0 channel 1 drive 1: <ST380011A>
wd3: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
wd3(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801DB SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: irq 9,
ICH4 AC97
ac97: codec id 0x414c4780 (Avance Logic ALC658)
ac97: codec features 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ed6d netmask ed6d ttymask fdef
pctr: user-level cycle counter enabled
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
wd2: no disk label
dkcsum: wd2 matched BIOS disk 82
dkcsum: wd3 matched BIOS disk 83
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
