On Sun, 12 Jun 2005, steven n fettig wrote:
I've taken a look at a few messages in the archives, but can't make
heads or tails as to the current status of setting cHDLC on the A102u.
I'm still going back and forth with Sangoma trying to get the A101
cards to work with the native drivers...
How do I best go about setting the card to cHDLC (everything else for my
T's are standard: B8ZS, ESF, all channels)? It appears that the cards
will bring up the T's but I can't pass data or even ping my side of the
interface. Anyone using these cards with 3.7 (if not, what are you
using) and having luck?
The native drivers default to cHDLC, so no options are necessary. While
fractional T1s don't work right now (it's my current issue with Sangoma),
an all channel setup should. You may have to do an explicit "ifconfig
san0 up" and wait a little while, though (Look for "Link connected!" in
your syslog).
Regards,
Greg
\|/ ___ \|/ [EMAIL PROTECTED] +----- 2048/83C90191 -----+
@~./'O o`\.~@ | 0B 65 E0 58 F3 F9 81 F5 |
/__( \___/ )__\ | F0 72 75 FA 1E BD C9 66 |
`\__`U_/' +-------------------------+
