Hiya.
I was told in [EMAIL PROTECTED] to email this address to ask for
helpb& so yeah. :)
The problem is, I bought a USB 2.0 PCI controller card for my server, but it
only will work at 1.0 or 1.1 (not sure which) speeds. The 2.0 isnbt
working.. It says bnot configuredb in the dmesg.
OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 599 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FX
SR,SSE
cpu0: disabling processor serial number
real mem = 536461312 (523888K)
avail mem = 491323392 (479808K)
using 4278 buffers containing 26927104 bytes (26296K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/06/00, BIOS32 rev. 0 @ 0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfc670/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLP LM20.4>
wd0: 16-sector PIO, LBA, 19470MB, 39876480 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Lite-On, LTN483S 48x Max, PD02> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 7 function 3 not configured
uhci1 at pci0 dev 14 function 0 "VIA VT83C572 USB" rev 0x61: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 14 function 1 "VIA VT83C572 USB" rev 0x61: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
"VIA VT6202 USB 2.0" rev 0x63 at pci0 dev 14 function 2 not configured
ppb1 at pci0 dev 15 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci2 at ppb1 bus 2
xl0 at pci0 dev 17 function 0 "3Com 3c905B 100Base-TX" rev 0x24: irq 11
address 00:b0:d0:44:ed:95
exphy0 at xl0 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
wss1 at isapnp0 "CS4236B, CSC0000, , WSS/SB" port 0x534/4,0x388/4,0x220/16 irq
5 drq 1,0: CS4236/CS4236B (vers 0)
audio0 at wss1
joy0 at isapnp0 "CS4236B, CSC000F, , Game" port 0x3a0/8
"CS4236B, CSC0010, , Ctrl" at isapnp0 port 0xf00/8 not configured
"CS4236B, CSC0003, , MPU" at isapnp0 port 0x330/2 not configured
biomask cc40 netmask cc40 ttymask ccc2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: BUSlink USB 2.0 Hard Drive, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <SAMSUNG, SP8004H, QW10> SCSI0 0/direct fixed
sd0: 76351MB, 76351 cyl, 64 head, 32 sec, 512 bytes/sec, 156368017 sec total
It would be this line
"VIA VT6202 USB 2.0" rev 0x63 at pci0 dev 14 function 2 not configured
But there are three other bnot configuredbs in there too, would you mind
also looking at those? =)
Thanks for your time!
~Lauren
