Could not realize it, sorry. I had to mark obsd one to try to boot, but i could not in the second setup.
So to come back to windows i had to mark partition 0 as bootable. On 6/30/05, Renzo Fabriek <[EMAIL PROTECTED]> wrote: > Op donderdag 30 juni 2005 03:46, schreef Gustavo Rios: > > I have installed my box the way it does not boot. I am sending here my > > disk layout. > > > > You may ask how did i obtained that: > > > > I could boot from cdrom into my installation, like in: > > > > boot hd0a:/bsd > > > > And it rocks, evreything thing went ok. What is getting losing my mind > > is the fact i cannot boot directly from the disk. > > > > Ok, the setup is here: > > > > fdisk: > > > > Disk: wd0 geometry: 9726/255/63 [156248190 Sectors] > > Offset: 0 Signature: 0xAA55 > > Starting Ending LBA Info: > > #: id C H S - C H S [ start: size ] > > ------------------------------------------------------------------------ > > *0: 07 0 1 1 - 6714 57 63 [ 63: 107864001 ] HPFS/QNX/AUX > > 1: A6 6714 58 1 - 9726 28 46 [ 107864064: 48385936 ] OpenBSD > > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > > 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > > > > Your working setup from your first e-mail: > > Disk: wd0 geometry: 9726/255/63 [156248190 Sectors] > Offset: 0 Signature: 0xAA55 > Starting Ending LBA Info: > #: id C H S - C H S [ start: size ] > ------------------------------------------------------------------------ > 0: 07 0 1 1 - 6714 57 63 [ 63: 107864001 ] HPFS/QNX/AUX > *1: A6 6714 58 1 - 9726 28 46 [ 107864064: 48385936 ] OpenBSD > 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused > > Notice the asterix (*) . This marks the actvie partition that the bios will > boot. Do you see the differnce between the two configurations? > > [snip rest] > > Greetings > Renzo Fabriek
