I recently bought a D-Link DWL-G630 Rev. A1 at Radio Shack.
I took the card home plugged it in to my laptop and this message
was written to the console.
Marvell Semiconductor, 88W8310 802.11g Cardbus PC Card, 83, 01
(manufacturer 0x2df, product 0x8310) vendor "Marvell", unknown product
0x1fa6 (class network subclass ethernet, rev 0x07) at cardbus0 dev 0
function 0 not configured
So I looked on the i386 hardware page and It was not on the
supported wireless card list. Does anyone know if anybody is
writing a driver for this card? If not could somebody point me in
the right direction so I could try to write a driver myself?
Here is my dmesg:
OpenBSD 3.7 (GENERIC) #50: Sun Mar 20 00:01:57 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 448 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
real mem = 133734400 (130600K)
avail mem = 115527680 (112820K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(01) BIOS, date 03/08/00, BIOS32 rev. 0 @ 0xfd890
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 99%
apm0: AC on, battery charge high, charging
pcibios0 at bios0: rev 2.1 @ 0xfd890/0x770
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK1214GAP>
wd0: 16-sector PIO, LBA, 11513MB, 23579136 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002B, 1005> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1410 CardBus" rev
0x01: irq 11
eso0 at pci0 dev 17 function 0 "ESS SOLO-1 AudioDrive" rev 0x02:
ES1946 rev E, irq 5
eso0: mapping Audio 1 DMA using VC I/O space at 0x14b0
audio0 at eso0
opl0 at eso0: model OPL3
midi0 at opl0: <ESO Yamaha OPL3>
fxp0 at pci0 dev 18 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
address 00:50:8b:9d:55:05
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask ef4d netmask ef4d ttymask ffcf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
Marvell Semiconductor, 88W8310 802.11g Cardbus PC Card, 83, 01
(manufacturer 0x2df, product 0x8310) vendor "Marvell", unknown product
0x1fa6 (class network subclass ethernet, rev 0x07) at cardbus0 dev 0
function 0 not configured
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
