Okay...
This is direclty from my dmesg output:
-------------------<snip>-----------------
eso0 at pci0 dev 7 function 0 "ESS SOLO-1 AudioDrive" rev 0x02: ES1946
rev E, irq 5
eso0: mapping Audio 1 DMA using VC I/O space at 0xfc70
audio0 at eso0
opl0 at eso0: model OPL3
-------------------</snip>-----------------
And this is from 'mixerctl -av' :
-------------------<snip>-----------------
inputs.dac=112,112 volume
inputs.mic=0,0 volume
inputs.line=0,0 volume
inputs.fmsynth=112,112 volume
inputs.mono_in=0 volume
inputs.cd=0,0 volume
inputs.auxb=0,0 volume
outputs.master=252,252 volume
outputs.pc_speaker=112 volume
outputs.spatial=0 level
outputs.spatial.enable=off [ off on ]
record.record=32,32 volume
record.dac=240,240 volume
record.mic=0,0 volume
record.line=0,0 volume
record.fmsynth=240,240 volume
record.mono_in=0 volume
record.cd=0,0 volume
record.auxb=0,0 volume
record.source=mic [ mic line cd mixerout ]
outputs.mono_out=mute [ mute dac mixerout ]
monitor.mute=off [ off on ]
mic.preamp=off [ off on ]
-------------------</snip>----------------------
since master is at 252,252 I would think it looks okay...
Everything looks nominal in kmix as well.
Thanks for you help!
Chris
Chris wrote:
Greetings everyone,
As the subject states, I am not getting any sound from the soundcard
in my laptop. According to dmesg, it is detected. It worked when
win98 ran on this system, and when I boot to Knoppix.
I couldn't find any specific references in the documentation to
trouble-shooting sound cards, so I am not even sure where to start. I
am still very much a newbie.
I have installed KDE on the system, and tried to play several
different wav files. Somtimes I will hear an extremely high-pitched
(almost inaudible) "beep" like noise -- but most of the time I hear
nothing. I have opened KMIX, turned on all channels and cranked them
to the maximum. Still nothing.
I am at a loss, can someone please point me in the right direction here?
Thank you.
Chris
