On Sat, 16 Jul 2005 10:27:15 +0200, Przemys3aw Nowaczyk wrote:
>Hello misc,
>I'm going to buy a IBM R50e notebook and I would like it to have an
>a/b/g wireless card. I know that the best way is to buy a laptop with
>the Atheros chip, but in Poland IBM doesn't sell notebooks with it
>onboard, so I'll have to buy a separate one (like 31P9701). I made some
>check up at http://customerproducts.atheros.com/customerproducts and I
>found that the IBM mini-pci card has an AR5001X+ chip. In ath(4) it's
>written that only AR5210/AR5211/AR5212 are supported. Does it mean that
>this IBM card isn't? Or am I missing something?
>Thanks in advance,
>--
>Przemys3aw Nowaczyk <[EMAIL PROTECTED]>
>CS student @ Poznan University of Technology
>
>
I have a Lenovo ThinkPad R50e 1834-BM8 which came with an IBM Atheros
AR5212 based mini-PCI a/b/g card which works better with OpenBSD than
it does with the XP-Pro that came installed. The only access point I
have is 802.11b with a Prism 2.5 card running on OpenBSD 3.6.
Here is the dmesg that I am about to send in to dmesg@ as soon as I
check out a few things. The card didn't work with 3.7 but is fine with
a snap from 20050712.
HTH & HAND
Rod/
====
OpenBSD 3.7-current (GENERIC) #239: Tue Jul 12 10:50:06 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI
,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 526884864 (514536K)
avail mem = 473886720 (462780K)
using 4278 buffers containing 26447872 bytes (25828K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c1) BIOS, date 02/21/05, BIOS32 rev. 0 @
0xfd740
pcibios0 at bios0: rev 2.1 @ 0xfd6d0/0x930
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xd000! 0xcd000/0x1000 0xce000/0x1000
0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not
configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xe0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 1
cbb0 at pci1 dev 0 function 0 "Texas Instruments PCI1510 CardBus" rev
0x00: irq 11
ath0 at pci1 dev 2 function 0 "Atheros AR5212 (IBM MiniPCI)" rev 0x01:
irq 11
ath0: AR5212 5.9 phy 4.3 rf5112 3.6, WOR01W, address 00:0e:9b:d7:2d:5b
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x81: irq 11,
address 00:0a:e4:34:80:ad
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01:
SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <HTS424040M9AT00>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA760 DVD/CDRW, 1.02> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11,
ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
===
>From the land "down under": Australia.
Do we look <umop apisdn> from up over?
Do NOT CC me - I am subscribed to the list.
Replies to the sender address will fail except from the list-server.
