Avtar Gill wrote:
Stephen Marley wrote:
Have you tried a crossover cable, bypassing the switch?
Words of wisdom right there. I would definitely try a crossover cable
between the OpenBSD server and your client machine. That will show you
whether the problem lies with Samba or elsewhere. I remember
experiencing problems like yours years ago (no Samba though) and
specifying half-duplex resolved the issue.
Thanks Stephen.
I heeded your words of wisdom and after some rummaging I found a
crossover cable. Hooked it up the same winXP box direct and the exact
same result.
Also I have just grabbed the stable branch from cvs and am running
stable GENERIC and still doesn't fix it. Just a recap - the problem is
not just samba writes to either of the data disks from the network via
samba or scp are painfully slow. Reads from the box to the network are
fast. Copying files from one disk to another one the server are fast.
thanks
Gary
$ dmesg
OpenBSD 3.7-stable (GENERIC) #0: Tue Jul 19 17:45:55 PDT 2005
[EMAIL PROTECTED]:/home/krusadr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 501 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,SER,MMX,FXSR,SSE
cpu0: disabling processor serial number
real mem = 133787648 (130652K)
avail mem = 115576832 (112868K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(06) BIOS, date 03/03/00, BIOS32 rev. 0 @ 0xf0520
apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd92
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0d10/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia Riva TNT" rev 0x04
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wire
d to compatibility
wd0 at pciide0 channel 0 drive 0: <Seagate Technology 1080MB - ST31082A>
wd0: 16-sector PIO, LBA, 1032MB, 2114180 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6B200P0>
wd1: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd2 at pciide0 channel 1 drive 0: <Maxtor 6Y200P0>
wd2: 16-sector PIO, LBA48, 194481MB, 398297088 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <, 52X24X52 CD-RW, 1.07> SCSI0 5/cdrom
removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 4 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0 dev 4 function 3 not configured
dc0 at pci0 dev 9 function 0 "ADMtek AN983" rev 0x11: irq 9, address
00:50:bf:9c:62:e4
ukphy0 at dc0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000749, model 0x0001, rev. 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using
wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83781D
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isapnp0 at isa0 port 0x279: read port 0x203
sb1 at isapnp0 "Creative SB AWE64 PnP, CTL0042, , Audio" port
0x220/16,0x330/2,0x388/4 irq 5 drq 1,5: dsp v4.16
midi1 at sb1: <SB MPU-401 UART>
audio0 at sb1
opl0 at sb1: model OPL3
midi2 at opl0: <SB Yamaha OPL3>
joy0 at isapnp0 "Creative SB AWE64 PnP, CTL7002, PNPB02F, Game" port 0x200/8
"Creative SB AWE64 PnP, CTL0022, , WaveTable" at isapnp0 port 0x620/4
not configured
wdc2 at isapnp0 "Creative SB AWE64 PnP, CTL2011, PNP0600, IDE" port
0x168/8,0x36e/2 irq 10
biomask ef45 netmask ef45 ttymask ffc7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
dkcsum: wd2 matched BIOS disk 82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:50:bf:9c:62:e4
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.20.3 netmask 0xffffff00 broadcast 192.168.20.255
inet6 fe80::250:bfff:fe9c:62e4%dc0 prefixlen 64 scopeid 0x1
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 2020
enc0: flags=0<> mtu 1536
