Hi jmc, Thanks for your answer.
My connection works with an userland pppoe config (ppp.conf, ...). I also tested with pf disabled. Same result... I cannot obtain my remote address. Unfortunately my local and remote (gateway) isp ip addresses are dynamic (so I use wildcard addresses for both). And you are right for the /etc/mygate! I have got one... for a previous configuration. I deleted it and now I can ping the outside. This is strange, is that with this misconfigured mygate the userland pppoe configuration was working. So it seems to work correctly but the gateway is still 0.0.0.1, which is not a problem I guess. Thanks again for your help. >your connection is up and working. maybe you have filter rules >blocking >access somewhere, or an /etc/mygate file overwriting your default >route? > >i don't know about the 0.0.0.1 syntax changing, since i don't use >it. >but if you have a permanent (static) gateway address, you could >plug >that value into /etc/hostname.pppoe0. i don't think it's your >problem >though. > >jmc -- Alexis de BRUYN email : [EMAIL PROTECTED] web : http://www.de-bruyn.fr >-----Message d'origine----- >De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la >part de Jason McIntyre >Envoyi : mercredi 3 ao{t 2005 10:42 >@ : misc@openbsd.org >Objet : Re: openbsd 3.7 in-kernel pppoe issues > >On Wed, Aug 03, 2005 at 07:14:54AM +0200, Alexis de BRUYN wrote: >> >> pppoe0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> >mtu 1492 >> >> dev: ne3 state: session >> >> sid: 0xc368 PADI retries: 0 PADR retries: 0 time: >0:2:38 >> >> inet 84.97.3.232 --> 0.0.0.1 netmask 0xffffffff >> >> inet6 fe80::204:76ff:fe94:23a7%pppoe0 -> prefixlen 64 >scopeid 0x9 >> >> May the gateway ip address change (to 84.97.3.1 in my case) as >a userlang >> pppoe config or not ? As you can see 0.0.0.0 becomes >84.97.3.232 (my dynamic >> ip).
