I'm able to get sensor data from the BIOS; is there something I'm
missing to be able to get them from within OpenBSD on this system? dmesg
follows...
OpenBSD 3.7-current (GENERIC) #1: Sat Jul 30 19:44:49 CDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K7(tm) Processor ("AuthenticAMD" 686-class, 512KB L2 cache)
604 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX
real mem = 267952128 (261672K)
avail mem = 237645824 (232076K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/22/00, BIOS32 rev. 0 @
0xfdad0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7ae0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:3 ("AMD 756 Power" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "AMD 751 System" rev 0x25
ppb0 at pci0 dev 1 function 0 "AMD 751 PCI-PCI" rev 0x01
pci1 at ppb0 bus 1
pcib0 at pci0 dev 7 function 0 "AMD 756 ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "AMD 756 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC AC26400B>
wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD273BA>
wd1: 16-sector PIO, LBA, 26105MB, 53464320 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAF, CD-RW4424A, 1.18> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <, 40X CD-ROM, 1.3C> SCSI0 5/cdrom
removable
pciide0:1:0: multi-word DMA disabled due to chip revision
cd0(pciide0:1:0): using PIO mode 4
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
"AMD 756 Power" rev 0x03 at pci0 dev 7 function 3 not configured
ohci0 at pci0 dev 7 function 4 "AMD 756 USB Host" rev 0x06: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
vga1 at pci0 dev 8 function 0 "S3 ViRGE" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cmpci0 at pci0 dev 10 function 0 "C-Media Electronics CMI8738/C3DX
Audio" rev 0x10: irq 10
audio0 at cmpci0
rl0 at pci0 dev 11 function 0 "D-Link Systems 530TX+" rev 0x10: irq 9
address 00:11:95:26:23:07
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask e965 netmask eb65 ttymask fbe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Shawn K. Quinn <[EMAIL PROTECTED]>
