I'm having a bit of trouble with ccd. I have a box with 2 80G IDE drives and 1 200G IDE drive. I'm going by the FAQ step for step here but after the ccd is configured and I get ready to run disklabel -E ccd0 it only sees the first frive. I've redone it 6 or 7 times, and switched the drive order in ccd.conf. I've tried taking each drive out one at a time and doing it with the other two drives but it always ends up the same. I'm hoping somebody can help me out here. Hre's what I have in ccd.conf
ccd0 16 none /dev/wd2a /dev/wd1a /dev/wd0h wd2a is the 200G drive with one big empty partition wd1a is one of the 80G drives with one big empty partition wd0h is 78G, the other 2 went to the OS Any help or ideas would be appreciated. If there is any relevent information I left out let me know.
