The BIOS on your box is lying. Update it to something newer and it might magically work.
Also update to -current. On Mon, Aug 08, 2005 at 06:07:47PM -0500, bofh wrote: > Hi, > > I have a HP DL145-G2. The SCSI card that comes with is supposed to be > supported by the mpt driver - the LSI Logic 53c1030 Fusion. It's not. > > I also bought a MegaRAID 320-2X which I thought was supposed to be supported > by the ami driver, it's not. The MegaRaid has the latest bios, H429 build > Feb04, 2005. > > Tested under both i386 and amd64 (both 3.7 and -current on Aug 2, 2005). > > Anything that can be jiggled or twigged to make them work? Thanx in advance > for your kind help. > > Btw, what's a hardware RAID card (PCI-X) that is currently on the market > that is supported? I've already gotten two strikes even going with what's > supported by /amd64.html and /i386.html, so, if anyone has any > recommendation, I'd really appreciate it. > > -Tai > > lspci -v and dmesg from the install disk follows: > > ---------8<-------- > 82:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 02) > Subsystem: LSI Logic / Symbios Logic MegaRAID 532 SCSI 320-2X RAID > Controller > Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 225 > Memory at d8600000 (32-bit, prefetchable) [size=64K] > Memory at d8100000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [c0] Power Management version 2 > Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- > Capabilities: [e0] PCI-X non-bridge device. > > 87:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X > Fusion-MPT Dual Ultra320 SCSI (rev 07) > Subsystem: Compaq Computer Corporation: Unknown device 00f4 > Flags: bus master, 66Mhz, medium devsel, latency 128, IRQ 233 > I/O ports at 2000 [size=256] > Memory at d8220000 (64-bit, non-prefetchable) [size=128K] > Memory at d8200000 (64-bit, non-prefetchable) [size=128K] > Capabilities: [50] Power Management version 2 > Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- > Capabilities: [68] PCI-X non-bridge device. > > --------8<------- > >> OpenBSD/i386 BOOT 2.06 > boot> > booting fd0a:/bsd: 4302596+825452=0x4e40b8 > entry point at 0x100120* > > WARNING: CAN'T ALLOCATE RAM (5000-c0000000) FROM IOMEM EXTENT MAP! > uvm_page_physload: unable to load physical memory segment > 4 segments allocated, ignoring 0x1000 -> 0xbfffc > increase VM_PHYSSEG_MAX > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005 > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD > cpu0: AMD Opteron(tm) Processor 252 ("AuthenticAMD" 686-class) 2.62 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF > LUSH,MMX,FXSR,SSE,SSE2,PNI > real mem = 2146107392 (2095808K) > avail mem = 2772189184 (2707216K) > using 4278 buffers containing 280363008 bytes (273792K) of memory > mainbus0 (root) > bios0 at mainbus0: AT/286+(fc) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd5f0 > pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10 > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/288 (16 entries) > pcibios0: no compatible PCI ICU found: ICU vendor 0x10de product 0x0051 > pcibios0: Warning, unable to fix up PCI interrupt routing > pcibios0: PCI bus #4 is the last bus > bios0: ROM list: 0xc0000/0xd400 0xcd800/0x1000 0xce800/0x1600 0xd0000/0x1600 > 0xd > 1800/0x2200 0xd4000/0x800 > cpu0 at mainbus0 > pci0 at mainbus0 bus 0: configuration mode 1 (no bios) > vendor "Nvidia", unknown product 0x005e (class memory subclass > miscellaneous, re > v 0xa3) at pci0 dev 0 function 0 not configured > pcib0 at pci0 dev 1 function 0 vendor "Nvidia", unknown product 0x0051 rev > 0xa3 > vendor "Nvidia", unknown product 0x0052 (class serial bus subclass SMBus, > rev 0x > a2) at pci0 dev 1 function 1 not configured > ohci0 at pci0 dev 2 function 0 vendor "Nvidia", unknown product 0x005a rev > 0xa2: > irq 10, version 1.0, legacy support > ohci0: SMM does not respond, resetting > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 > uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > ehci0 at pci0 dev 2 function 1 vendor "Nvidia", unknown product 0x005b rev > 0xa3: > irq 11 > ehci0: timed out waiting for BIOS > ehci0: EHCI version 1.0 > ehci0: companion controller, 4 ports each: ohci0 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 > uhub1: Nvidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub1: single transaction translator > uhub1: 4 ports with 4 removable, self powered > pciide0 at pci0 dev 6 function 0 vendor "Nvidia", unknown product 0x0053 rev > 0xa > 2: DMA (unsupported), channel 0 configured to compatibility, channel 1 > configure > d to compatibility > atapiscsi0 at pciide0 channel 0 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable > pciide0: channel 1 ignored (not responding; disabled or no drives?) > pciide1 at pci0 dev 8 function 0 vendor "Nvidia", unknown product 0x0055 rev > 0xa > 3: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to > native-P > CI > pciide1: using irq 10 for native-PCI interrupt > pciide1: channel 0 ignored (not responding; disabled or no drives?) > pciide1: channel 1 ignored (not responding; disabled or no drives?) > ppb0 at pci0 dev 9 function 0 vendor "Nvidia", unknown product 0x005c rev > 0xa2 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 5 function 0 "Nvidia GeForce2 MX" rev 0xb2 > wsdisplay0 at vga1: console (80x25, vt100 emulation) > ppb1 at pci0 dev 12 function 0 vendor "Nvidia", unknown product 0x005d rev > 0xa3 > pci2 at ppb1 bus 2 > bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown BCM5750 > (0x41 > 01): irq 11 address 00:14:38:a7:44:86 > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > ppb2 at pci0 dev 13 function 0 vendor "Nvidia", unknown product 0x005d rev > 0xa3 > pci3 at ppb2 bus 3 > bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, unknown BCM5750 > (0x41 > 01): irq 10 address 00:14:38:a7:44:87 > brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 > ppb3 at pci0 dev 14 function 0 vendor "Nvidia", unknown product 0x005d rev > 0xa3 > pci4 at ppb3 bus 4 > pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00 > pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00 > pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00 > pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using > wsdisplay0 > npx0 at isa0 port 0xf0/16: using exception 16 > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pccom0: console > biomask ffed netmask ffed ttymask ffef > rd0: fixed, 3800 blocks > root on rd0a > rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 > dmesg: sysctl: KERN_MSGBUFSIZE: Device not configured > erase ^?, werase ^W, kill ^U, intr ^C, status ^T > (I)nstall, (U)pgrade or (S)hell?
