Just tried adding a SATA drive to my ASUS K8S-MX system using -current
(as of August 13th) and got the following message (repeated twice before
the system hung up) during the boot:
wd2(pciide1:0:0): timeout
type: ata
c_bcount: 512
c_skip: 0
This is similar to the problem I had when I tried to install OpenBSD 3.7
amd64 except that time it was for "wd0" (an IDE drive) and I also got the
additional line:
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x21
That time I tried:
boot -c
UKC> change wd
change (y/n) ? y
channel [-1] ? -1
flags [0] ? 0xff0
UKC> quit
and was able to install the system. This time it made no difference with
-current. Is there a solution to this problem (short of not using SATA
drives or replacing the motherboard)?
Joe
dmesg output (minus the SATA drive info since I can't boot with the SATA
drive attached) follows:
OpenBSD 3.8-beta (GENERIC) #1: Sun Aug 14 11:59:10 CDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 502722560 (490940K)
avail mem = 419856384 (410016K)
using 12324 buffers containing 50479104 bytes (49296K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 2800+, 2029.83 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFL
USH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "SIS 760 PCI" rev 0x03
ppb0 at pci0 dev 1 function 0 "SIS 86C202 VGA" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"SIS 965 PCI" rev 0x47 at pci0 dev 2 function 0 not configured
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0x01: 760: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALLlct15 10>
wd0: 16-sector PIO, LBA, 9736MB, 19941264 sectors
wd1 at pciide0 channel 0 drive 1: <QUANTUM FIREBALL EX3.2A>
wd1: 16-sector PIO, LBA, 3079MB, 6306048 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd2 at pciide0 channel 1 drive 0: <HDS722512VLAT20>
wd2: 16-sector PIO, LBA48, 117800MB, 241254720 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 52X/AKH, A63> SCSI0 5/cdrom
removable
wd2(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 10, SiS7012
AC97
ac97: codec id 0x41445368 (Analog Devices AD1888)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SIS 5597/5598 USB" rev 0x0f: irq 5,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SIS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SIS 5597/5598 USB" rev 0x0f: irq 5,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SIS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2 "SIS 5597/5598 USB" rev 0x0f: irq 3,
version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: SIS OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3 "SIS 7002 USB" rev 0x00: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: SIS EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
vendor "SIS", unknown product 0x0190 (class network subclass ethernet,
rev 0x00) at pci0 dev 4 function 0 not configured
pciide1 at pci0 dev 5 function 0 "SIS 182 SATA" rev 0x01: DMA
pciide1: using irq 11 for native-PCI interrupt
ppb1 at pci0 dev 6 function 0 vendor "SIS", unknown product 0x000a rev
0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 7 function 0 vendor "SIS", unknown product 0x000a rev
0x00
pci3 at ppb2 bus 3
dc0 at pci0 dev 9 function 0 "Lite-On PNIC" rev 0x20: irq 10, address
00:a0:cc:24:be:91
mtdphy0 at dc0 phy 1: MTD972 10/100 PHY, rev. 8
pchb1 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown winbond chip ID 0x88
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
dkcsum: wd2 matches BIOS drive 0x82
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
dc0: failed to force tx and rx to idle state
dc0: failed to force tx and rx to idle state
