If you want internationalization, start your xterm with "-en UTF-8" and "-fn -misc-fixed-medium-r-normal--15-140-75-75-c-90-iso10646-1"
Then install bash from packages. type in bash set meta-flag on set output-meta on set convert-meta off And enjoy :) csh does not allow editing so arrows and tab will not work, but tildas and umlauts will do, tcsh and ksh have lousy support for UTF-8, all of them just good for 8-bit encodings and need special settings to use 8th bit. PS: these settings can go to .Xdefaults and .inputrc . Utf-8 fonts for xterm can be grepped with "xlsfonts | grep 10646" --- Carlos Zumajo <[EMAIL PROTECTED]> wrote: > Well, in csh, the key "Q" (n tilde) work fine, but > don4t arrow keys. > > In sh, the key "Q" (n tilde) don4t work but ok with > arrow keys. > > It seems that the problem is the one that you say, > at least each shell > behaves with the keyboard of different form, but > none of them works well > absolutely. > > Now I need how to configure this. I am going to > search information about > this, because I don4t know doing it. > > Thanks. > > Carlos. > > > Vladislav Belogrudov wrote: > > > do you have problem in bash, ksh, csh, emacs ....? > > Each of the apps has its own tricks for 8 bit or > uft-8 > > handling. > > > > --- Carlos Zumajo <[EMAIL PROTECTED]> wrote: > > > > > >>Hi all. > >> > >>I have installed OpenBSD 3.7 on SparcStation 4. > The > >>installation process > >>finished successfully. > >> > >>But I have a issue with keyboard. My keyboard is > >>type5 spanish. In the > >>login field, X or console, I can write the "Q" > >>letter. After I login > >>with normal user this key don4t work, only beep. > >>When I4m root this key > >>work as spected, but arrows keys don4t work > >> > >> From normal user I tried wsconsctl to turn to > >>spanish encoding and I > >>have no errors, but this key "Q", only beep. I do > >>the same with kbd but > >>I have no differences. > >> > >>In a X, I tried XKeycaps, and the keyboard > detected > >>is a PC with 104 > >>keys. When I change this by keyboard Sun > >>Microsystems Type 5 > >>OpenWindows Spanish layout and write changes, > there > >>are no working keys. > >>All the keys are mapping different that I can see > in > >>Xkeycaps. For > >>example, if I press "H" the key obtained by > xkeycaps > >>is "7". > >> > >>Where is the problem? > >> > >>This is my first post and I hope to help you in a > >>few time. Thank you > >>very much. > >> > >>Carlos. > >> > >>This is my dmesg result: > >> > >>OpenBSD 3.7 (GENERIC) #312: Mon Mar 21 00:14:33 > MST > >>2005 > >> > >> > > > > > [EMAIL PROTECTED]:/usr/src/sys/arch/sparc/compile/GENERIC > > > >>real mem = 33214464 > >>avail mem = 25190400 > >>using 200 buffers containing 1658880 bytes of > memory > >>bootpath: > >> > > > > > /[EMAIL PROTECTED],10000000/[EMAIL PROTECTED],10001000/[EMAIL PROTECTED],8400000/[EMAIL PROTECTED],8800000/[EMAIL PROTECTED],0 > > > >>mainbus0 (root): SUNW,SPARCstation-4 > >>cpu0 at mainbus0: MB86904 @ 110 MHz, on-chip FPU > >>cpu0: 16K instruction (32 b/l), 8K data (16 b/l) > >>cache enabled > >>obio0 at mainbus0 > >>clock0 at obio0 addr 0x71200000: mk48t08 (eeprom) > >>timer0 at obio0 addr 0x71d00000 delay constant 52 > >>zs0 at obio0 addr 0x71100000 pri 12, softpri 6 > >>zstty0 at zs0 channel 0 > >>zstty1 at zs0 channel 1 > >>zs1 at obio0 addr 0x71000000 pri 12, softpri 6 > >>zskbd0 at zs1 channel 0: keyboard, type 5, layout > >>0x2a > >>wskbd0 at zskbd0: console keyboard > >>zstty2 at zs1 channel 1: mouse > >>slavioconfig at obio0 addr 0x71800000 not > configured > >>auxreg0 at obio0 addr 0x71900000 > >>power0 at obio0 addr 0x71910000 > >>fdc0 at obio0 addr 0x71400000 pri 11, softpri 4: > >>chip 82077 > >>iommu0 at mainbus0 addr 0x10000000: version > 0x4/0x0, > >>page-size 4096, > >>range 64MB > >>sbus0 at iommu0: clock = 22 MHz > >>dma0 at sbus0 slot 4 offset 0x8400000: rev 2 > >>esp0 at dma0 offset 0x8800000 pri 4: ESP200, > 40MHz, > >>SCSI ID 7 > >>scsibus0 at esp0: 8 targets > >>sd0 at scsibus0 targ 3 lun 0: <FUJITSU, MAN3184MC, > >>5508> SCSI3 0/direct > >>fixed > >>sd0: 17366MB, 29694 cyl, 2 head, 598 sec, 512 > >>bytes/sec, 35566478 sec total > >>cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, > >>XM-4101TASUNSLCD, 1755> SCSI2 > >>5/cdrom removable > >>bpp0 at sbus0 slot 4 offset 0xc800000: DMA2 > >>ledma0 at sbus0 slot 4 offset 0x8400010: rev 2 > >>le0 at ledma0 offset 0x8c00000 pri 6: address > >>08:00:20:7b:13:e6 > >>le0: 16 receive buffers, 4 transmit buffers > >>tcx0 at sbus0 slot 2 offset 0x800000: 1152x900, id > >>0, rev 2, sense 0 > >>wsdisplay0 at tcx0: console (std, sun emulation), > >>using wskbd0 > >>power-management at sbus0 slot 3 offset 0xa000000 > >>not configured > >>root on sd0a > >>rootdev=0x700 rrootdev=0x1100 rawdev=0x1102 > >> > >> > > > > > > > > > > > > > ____________________________________________________ > > Start your day with Yahoo! - make it your home > page > > http://www.yahoo.com/r/hs > > ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs
