Hi!
I am using an IBM Thinkpad 600e (2645-4AU) with a cs4610 soundchip,
running a OpenBSD 3.7 (nothing special, default installation).
(Before 3.7 i installed a 3.6 which shows the same errors as above while
booting, but the sound works, till i rebooted the first time (the
strangest part of the story).)
While booting i get a lot of errors, sound does not work. If i start a
player (mpg123) i dont get any errors, it just do not start.
I Also did not get the sound running with any linux, with windows it
works fine.
here is my dmesg:
OpenBSD 3.7-current (GENERIC) #66: Mon Aug 8 00:04:30 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 364 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 200712192 (196008K)
avail mem = 176291840 (172160K)
using 2475 buffers containing 10137600 bytes (9900K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(95) BIOS, date 11/20/99, BIOS32 rev. 0 @ 0xfd820
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 97%
apm0: AC on, battery charge high
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x800
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9e20/112 (5 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA"
rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "Texas Instruments PCI1251 CardBus" rev
0x00: irq 11
cbb1 at pci0 dev 2 function 1 "Texas Instruments PCI1251 CardBus" rev
0x00: irq 11
clcs0 at pci0 dev 6 function 0 "Cirrus Logic CS4610 SoundFusion" rev
0x01: irq 11
reset_codec: AC97 inputs slot ready timeout
clcs0: AC97 write fail (DCV!=0) for add=0x26 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x00 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x06 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x04 data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x08 data=0x0f0f
clcs0: AC97 write fail (DCV!=0) for add=0x08 data=0x0f0f
clcs0: AC97 write fail (DCV!=0) for add=0x0a data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x0c data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x0e data=0x8008
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x10 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x14 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x16 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x8808
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x1e data=0x8000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x20 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x22 data=0x0000
clcs0: AC97 write fail (DCV!=0) for add=0x38 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 write fail (DCV!=0) for add=0x36 data=0x8080
clcs0: AC97 read prob. (DCV!=0) for add=0x7c
clcs0: AC97 read prob. (DCV!=0) for add=0x7e
clcs0: AC97 read prob. (DCV!=0) for add=0x00
ac97: codec id not read
clcs0: AC97 read prob. (DCV!=0) for add=0x28
clcs0: AC97 read prob. (DCV!=0) for add=0x02
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x18
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
clcs0: AC97 read prob. (DCV!=0) for add=0x1c
clcs0: AC97 write fail (DCV!=0) for add=0x1c data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x1a
clcs0: AC97 write fail (DCV!=0) for add=0x1a data=0x0000
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-220>
wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2102, 1139> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
xl0 at cardbus1 dev 0 function 0 "3Com Corporation, 3CCFE575CT, LAN
Cardbus Card": 3Com 3c575C-TX Ethernet: irq 11, address 00:00:86:50:ee:23
tqphy0 at xl0 phy 0: 78Q2120 10/100 PHY, rev. 11
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Tsunami product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
clcs0: firmware loaded
clcs0: AC97 read prob. (DCV!=0) for add=0x02
clcs0: AC97 write fail (DCV!=0) for add=0x02 data=0x0000
clcs0: AC97 read prob. (DCV!=0) for add=0x18
clcs0: AC97 write fail (DCV!=0) for add=0x18 data=0x0808
clcs0: AC97 read prob. (DCV!=0) for add=0x12
clcs0: AC97 write fail (DCV!=0) for add=0x12 data=0x0808
audio0 at clcs0
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x0
SENSE KEY: Not Ready
ASC/ASCQ: Medium Not Present
thanks in advance, enno
