Sorry about the recycle. I've cced the list and changed the topic to reflect
a new (worse) problem.

Just did a clean install using amd64 3.7. SP kernel is working just fine and
I'm able to boot and play around without a problem. Upon trying to switch to
the generic.mp <http://generic.mp> kernel I drop into a panic on boot.
Attached are my two dmesgs, one from SP kernel and one from the MP kernel
with the panic messages. I hope I've included enough information from the
panic, if not please let me know what else might be needed.

Anyone have any thoughts? :(

- S


On 8/31/05, Rogier Krieger <[EMAIL PROTECTED]> wrote:
>
> As I doubt this e-mail will solve the problem, I sent it off-list.
>
> On 8/31/05, Eci Souji <[EMAIL PROTECTED]> wrote:
> > On the subject of LSI cards tho I do have another question that I was
> hoping
> > I could get some help with.
>
> Please don't recycle one question's thread for use on another; it
> messes things up.
>
>
> > We've got some Tyan GX28's [...] here running 3.7 in single processor
> mode
> > using LSI Megaraid SATA 150-4 adapters. Everything works fine until we
> try
> > to run with multiple processors
>
> In such cases, please provide a dmesg at the same time you report it.
> Personally, I use pretty much the same board (the S2882-D) for amd64
> with GENERIC.MP <http://GENERIC.MP> and the errata since 3.7-release. Both
> in UP and SMP
> modes, things work just fine.
>
> I did upgrade the card's firmware, though not out of any hardware
> problems. My happy user report is somewhere in the archives [1]. My
> current dmesg is available on-line [2] as well.
>
> If 3.7 or 3.7-stable fail, you may want to give 3.8 snapshots a spin
> to see if the problem persists.
>
> Cheers,
>
> Rogier
>
> References:
> 1. MARC: msg 'LSI MegaRAID 150-4 (a.k.a. LSI/Symbios 523)'
> http://marc.theaimsgroup.com/?l=openbsd-misc&m=111523292910926&w=2
> 2. Tyan S-2882D dmesg (amd64, GENERIC.MP <http://GENERIC.MP>)
>
>
http://iverdahl.net/bsd/files/OpenBSD37-amd64-GENERIC.MP-Tyan-S2882D.dmesg.tx
t
>
> --
> If you don't know where you're going, any road will get you there.
OpenBSD 3.7 (GENERIC) #31: Sun Mar 20 00:42:28 MST 2005
    [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1073278976 (1048124K)
avail mem = 909357056 (888044K)
using 22937 buffers containing 107536384 bytes (105016K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Opteron(tm) Processor 244, 1791.82 MHz
cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 
16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 3
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: irq 9, version 1.0, 
legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: irq 9, version 1.0, 
legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
vga1 at pci1 dev 6 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci1 dev 8 function 0 "Intel 82557" rev 0x10, i82550: irq 11, address 
00:e0:81:2e:a5:79
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AMD AMD8111 LPC" rev 0x05 at pci0 dev 7 function 0 not configured
pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM SCR-242, CXAC> SCSI0 5/cdrom 
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
"AMD 8111 SMBus" rev 0x02 at pci0 dev 7 function 2 not configured
"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured
ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 2
bge0 at pci2 dev 9 function 0 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 
(0x2003): irq 10 address 00:e0:81:2e:a5:32
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 9 function 1 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 
(0x2003): irq 15 address 00:e0:81:2e:a5:33
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 10 function 1 not configured
ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12
pci3 at ppb2 bus 1
ami0 at pci3 dev 3 function 0 "Symbios Logic MegaRAID" rev 0x01: irq 10 LSI 
523/64b/lhc
ami0: FW 713N, BIOS vG119, 64MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus1 at ami0: 40 targets
sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 76314MB, 9728 cyl, 255 head, 63 sec, 512 bytes/sec, 156291072 sec total
"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 11 function 1 not configured
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
OpenBSD 3.7 (GENERIC.MP) #296: Sun Mar 20 00:54:29 MST 2005   

    [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

real mem = 1073278976 (1048124K)

avail mem = 909238272 (887928K)

using 22937 buffers containing 107536384 bytes (105016K) of memory

mainbus0 (root)

mainbus0: Intel MP Specification (Version 1.1) (TYAN     S2882       )

cpu0 at mainbus0: apid 0 (boot processor)

cpu0: AMD Opteron(tm) Processor 244, 1792.36 MHz

cpu0: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW

cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 
16-way L2 cache

cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative

cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative

cpu0: apic clock running at 199115185Hz

cpu1 at mainbus0: apid 1 (application processor)

cpu1: AMD Opteron(tm) Processor 244, 1792.04 MHz

cpu1: 
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW

cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 
16-way L2 cache

cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative

cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative

mpbios: bus 0 is type PCI   

mpbios: bus 1 is type PCI   

mpbios: bus 2 is type PCI   

mpbios: bus 3 is type PCI   

mpbios: bus 4 is type ISA   

ioapic0 at mainbus0 apid 2: pa 0xffff800001cc7e24, version 11, 24 pinsio

apic1 at mainbus0 apid 3: pa 0xffff800001cc7d24, version 11, 4 pinsio

apic2 at mainbus0 apid 4: pa 0xffff800001cc7c24, version 11, 4 pins

pci0 at mainbus0 bus 0: configuration mode 1ppb0 at pci0 dev 6 function 0 "AMD 
8111 PCI-PCI" rev 0x07

pci1 at ppb0 bus 3ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 
2 int 19 (irq 9), version 1.0, legacy support

usb0 at ohci0: USB revision 1.0uhub0 at usb0uhub0: AMD OHCI root hub, class 
9/0, rev 1.00/1.00, addr 1

uhub0: 3 ports with 3 removable, self powered

ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 2 int 19 (irq 9), 
version 1.0, legacy support

usb1 at ohci1: USB revision 1.0uhub1 at usb1uhub1: AMD OHCI root hub, class 
9/0, rev 1.00/1.00, addr 1

uhub1: 3 ports with 3 removable, self powered

vga1 at pci1 dev 6 function 0 "ATI Rage XL" rev 0x27

wsdisplay0 at vga1: console (80x25, vt100 emulation)

wsdisplay0: screen 1-5 added (80x25, vt100 emulation)

fxp0 at pci1 dev 8 function 0 "Intel 82557" rev 0x10, i82550: apic 2 int 18 
(irq 11), address 00:e0:81:2e:a5:79

inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4

"AMD AMD8111 LPC" rev 0x05 at pci0 dev 7 function 0 not configured

pciide0 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel 0 
configured to compatibility, channel 1 configured to compatibility

atapiscsi0 at pciide0 channel 0 drive 0

scsibus0 at atapiscsi0: 2 targets

cd0 at scsibus0 targ 0 lun 0: <QSI, CD-ROM SCR-242, CXAC> SCSI0 5/cdrom 
removable

cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2

pciide0: channel 1 ignored (disabled)

"AMD 8111 SMBus" rev 0x02 at pci0 dev 7 function 2 not configured

"AMD 8111 ACPI" rev 0x05 at pci0 dev 7 function 3 not configured

ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12

pci2 at ppb1 bus 2

bge0 at pci2 dev 9 function 0 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 
(0x2003): apic 3 int 0 (irq 10) address 00:e0:81:2e:a5:32

brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0

bge1 at pci2 dev 9 function 1 "Broadcom BCM5704C" rev 0x03, BCM5704 A3 
(0x2003): apic 3 int 1 (irq 15) address 00:e0:81:2e:a5:33

brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0

"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 10 function 1 not configured

ppb2 at pci0 dev 11 function 0 "AMD 8131 PCIX" rev 0x12

pci3 at ppb2 bus 1

ami0 at pci3 dev 3 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 4 int 0 
(irq 10) LSI 523/64b/lhc

ami0: FW 713N, BIOS vG119, 64MB RAM

ami0: 1 channels, 0 FC loops, 1 logical drives

scsibus1 at ami0: 40 targets

 Online 00:01sd0 at scsibus1 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 
0/direct fixed

sd0: 76314MB, 9728 cyl, 255 head, 63 sec, 512 bytes/sec, 156291072 sec total

"AMD 8131 PCIX IOAPIC" rev 0x01 at pci0 dev 11 function 1 not configured

pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00

pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00

pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00

pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00

pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00

pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00

pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00

isa0 at mainbus0

com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo

com0: cons Online 00:01      Offline ole

pckbc0  Online 00:00at isa0 port 0x60/5

pckbd0 at pckbc0 (kbd slot)

pckbc0: using irq 1 for kbd slot

wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0

pcppi0 at isa0 port 0x61

sysbeep0 at pcppi0

lm0 at isa0 port 0x290/8: W83627HF

dkcsum: sd0 matched BIOS disk 80

root on sd0a

rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

WARNING: / was not properly unmounted

cpu1: CPU 1 running

Automatic boot in progress: starting file system checks.

/dev/rsd0a: 1642 files, 17338 used, 1998324 free (140 frags, 249773 blocks, 
0.0% fragmentation)

/dev/rsd0a: MARKING FILE SYSTEM CLEAN

/dev/rsd0d: 11682 files, 115475 used, 1900203 free (235 frags, 237496 blocks, 
0.0% fragmentation)

/dev/rsd0d: MARKING FILE SYSTEM CLEAN

/dev/rsd0e: 686 files, 3467 used, 33383232 free (136 frags, 4172887 blocks, 
0.0% fragmentation)

/dev/rsd0e: MARKING FILE SYSTEM CLEAN

setting tty flags

starting network

kernel: protection fault trap, code=0

Stopped at      lapic_delay+0x2b:       cmpl    %esi,%edx

ddb{0}>  Online 00:01show panic

the kernel did not panic

ddb{0}> trace

lapic_delay() at lapic_delay+0x2b

bge_miibus_readreg() at bge_miibus_readreg+0x76

brgphy_service() at brgphy_service+0xf3

mii_tick() at mii_tick+0x21

bge_tick() at bge_tick+0x155

softintr() at softclock+0x219

hardclock() at hardclock+0x1ca

hardclock() at softintr_dispatch+0x57

softintr_dispatch() at lapic_clockintr+0x9

Xsoftclock() at Xsoftclock+0x2d

ddb{0}> machine ddb 1

Stopped at      Debugger+0x1:   ret

ddb{1}> trace Online 00:02

x86_ipi_handler() at Debugger+0x1

Xresume_lapic_ipi() at Xresume_lapic_ipi+0x16

ddb{1}> 

<<< Log from 69.9.41.142 ended August 31, 2005, 16:35:17 >>>


Reply via email to