Hello List,
I am unable to get pppoe to work with an alpha that I want to use as a
firewall. It panics
amap_wipeout: corrupt amap
when I connect the ADSL Speedstream modem to any of the three nic's.
I have used the same hostname.pppoe0 and ppp.conf files with the same
modem and a secondary nic on an i386 successfully.
My assumption is this is hardware related to the alpha and not OpenBSD.
Would anyone be able to check this out and verify this or let me know
how I can correct this error. Would ukc > disable amap work?
I Googled this and did not find any information on this.
Thank you,
rogern
John 3:16
ppp.conf
pppoedev de1
!/sbin/ifconfig de1 up
!/usr/sbin/spppcontrol \$if myauthproto=pap myauthname=xxxxxx \
myauthkey=xxxxxx
!/sbin/ifconfig \$if inet 0.0.0.0 0.0.0.1 netmask 0xffffffff
!/sbin/route add default 0.0.0.1
up
default:
set log Phase Chat LCP IPCP CCP tun command
set redial 15 0
set reconnect 15 0
pppoe:
set device "!/usr/sbin/pppoe -i de1"
disable acfcomp protocomp
deny acfcomp
set mtu max 1492
set speed sync
enable lqr
set lqrperiod 5
set cd 5
set dial
set login
set timeout 0
set authname xxxxxx
<http://by104fd.bay104.hotmail.msn.com/cgi-bin/compose?curmbox=00000000-0000-0000-0000-000000000005&a=d9d1a96b13850385229d6349db56a66cb301e5b1c03f299849ee88a783abf3a5&mailto=1&[EMAIL
PROTECTED]&msg=905312EE-3B52-4260-B863-71F6B0932ECB&start=0&len=71831&src=&type=x>
set authkey xxxxxx
add! default HISADDR
enable dns
enable mssfixup
Script started on Fri Sep 2 17:09:14 2005
# cu -l tty00Connected
^C
DKA0
DKA0 is not executable
boot DKA0
(boot dka0.0.0.1004.0 -flags a)
block 0 of dka0.0.0.1004.0 is a valid boot block
reading 15 blocks from dka0.0.0.1004.0
bootstrap code read in
base = 1d8000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1ca000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
OpenBSD/Alpha Primary Boot
...OpenBSD/Alpha boot 1.7
VMS PAL rev: 0x1000000010114, OSF PAL rev: 0x1000000020116
Loading bsd...
[ using 471328 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.8-beta (GENERIC) #573: Tue Aug 23 02:20:28 MDT 2005
[EMAIL PROTECTED]
<http://by104fd.bay104.hotmail.msn.com/cgi-bin/compose?curmbox=00000000-0000-0000-0000-000000000005&a=d9d1a96b13850385229d6349db56a66cb301e5b1c03f299849ee88a783abf3a5&mailto=1&[EMAIL
PROTECTED]&msg=905312EE-3B52-4260-B863-71F6B0932ECB&start=0&len=71831&src=&type=x>:/usr/src/sys/arch/alpha/compile/GENERIC
Digital Personal WorkStation 500au, 500MHz
8192 byte page size, 1 processor.
total memory = 134217728 (131072K)
(1941504 reserved for PROM, 132276224 used by OpenBSD)
avail memory = 109191168 (106632K)
using 1614 buffers containing 13221888 bytes (12912K) of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-0 (unknown minor type 0)
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config and bus access
pci0 at cia0 bus 0
de0 at pci0 dev 3 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 0
de0: DEC pass 3.0 address 00:00:f8:76:73:52
sio0 at pci0 dev 7 function 0 "Contaq Microsystems CY82C693U ISA" rev 0x00
pciide0 at pci0 dev 7 function 1 "Contaq Microsystems CY82C693U ISA" rev 0x00:
DMA, channel 0 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide1 at pci0 dev 7 function 2 "Contaq Microsystems CY82C693U ISA" rev 0x00:
no DMA, channel 0 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, CD-ROM XM-6302B, 1017> SCSI0 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4
ohci0 at pci0 dev 7 function 3 "Contaq Microsystems CY82C693U ISA" rev 0x00: isa
irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Contaq Microsys OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
tga0 at pci0 dev 11 function 0 "DEC TGA2" rev 0x22: TGA2 pass 2, board type
T8-02
tga0: 1024 x 768, 8bpp, Bt485 RAMDAC
tga0: interrupting at dec 550 irq 4
wsdisplay0 at tga0 mux 1
wsdisplay0: screen 0 added (std, vt100 emulation)
ppb0 at pci0 dev 20 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci1 at ppb0 bus 1
isp0 at pci1 dev 4 function 0 "QLogic ISP1020" rev 0x05: dec 550 irq 3
isp0: invalid NVRAM header
scsibus1 at isp0: 16 targets
sd0 at scsibus1 targ 0 lun 0: <DEC, RZ2CC-KA (C) DEC, 5520> SCSI2 0/direct fixed
sd0: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sec, 8380080 sec total
sd1 at scsibus1 targ 1 lun 0: <DEC, RZ2CC-KB (C) DEC, DC2B> SCSI2 0/direct fixed
sd1: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sec, 8380080 sec total
de1 at pci1 dev 8 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 12
de1: DEC DE500-BA pass 3.0 address 08:00:2b:c3:c9:01
de2 at pci1 dev 9 function 0 "DEC 21142/3" rev 0x30: dec 550 irq 16
de2: DEC DE500-BA pass 3.0 address 08:00:2b:c3:c3:d8
isa0 at sio0
vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072
wsdisplay1 at vga0 mux 1
wsdisplay1: screen 0-5 added (80x25, vt100 emulation)
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
isabeep0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
stray isa irq 15
root on sd0a swap on sd0b
rootdev=0x800 rrootdev=0x800 rawdev=0x802
swapctl: adding /dev/sd1b as swap device at priority 0
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd1e: file system is clean; not checking
/dev/rsd0d: file system is clean; not checking
/dev/rsd1d: file system is clean; not checking
setting tty flags
stray isa irq 3
vm.swapencrypt.enable: 1 -> 1
starting network
DHCPREQUEST on de0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.32 -- renewal in 1296000 seconds.
pppoe0: phase establish
add net default: gateway 0.0.0.1
pppoe0: phase network
starting system logger
starting rpc daemons:.
savecore: /dev/sd0b: Device not configured
checking quotas: done.
building ps databases: kvm devData modified on freelist: word 0 of object
0xfffffe00000df390 size 0x10 previous type free (0x0 != 0xdeadbeef)
.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Fri Sep 2 17:10:06 PDT 2005
Data modified on freelist: word 0 of object 0xfffffe00000f1010 size 0x10
previous type free (0x0 != 0xdeadbeef)
OpenBSD/alpha (stephen.Joshua.local) (tty00)
login: rogern
Password:
panic: amap_wipeout: corrupt amap
Stopped at Debugger+0x4: ret zero,(ra)
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(0, fffffc0000787940, 5, 8, 3, 8) at Debugger+0x4
panic(fffffc000071b234, 0, 1, 0, 1f, 0) at panic+0x130
amap_wipeout(?, 0, 1, 0, 1f, 0) at amap_wipeout+0x64
amap_unref(?, 0, 1, 0, 1f, 0) at amap_unref+0x48
uvm_unmap_detach(?, ?, ?, ?, 1f, 0) at uvm_unmap_detach+0x88
uvmspace_free(?, ?, ?, ?, ?, 0) at uvmspace_free+0x120
uvm_exit(?, ?, ?, ?, ?, 0) at uvm_exit+0x34
reaper(?, ?, ?, ?, ?, 0) at reaper+0xcc
start_reaper(?, ?, ?, ?, ?, 0) at start_reaper+0x18
netbsd_esigcode(?, ?, ?, ?, ?, 0) at netbsd_esigcode
PID PPID PGRP UID S FLAGS WAIT COMMAND
17006 1 1 0 3 0x4084 ttyopn getty
5103 1 5103 0 2 0x4086 login
24270 1 24270 0 3 0x4086 ttyin getty
13867 1 13867 0 3 0x84 select cron
20008 1 20008 0 3 0x84 select sshd
12346 1 12346 0 3 0x184 select inetd
16557 1 915 0 3 0x44186 select sendmail
8908 21514 21514 73 3 0x184 poll syslogd
21514 1 21514 0 3 0x84 netio syslogd
13674 1 13674 77 3 0x184 poll dhclient
9588 1 915 0 3 0x86 poll dhclient
10 0 0 0 3 0x100204 crypto_wa crypto
9 0 0 0 3 0x100204 aiodoned aiodoned
8 0 0 0 3 0x100204 syncer update
7 0 0 0 3 0x100204 cleaner cleaner
* 6 0 0 0 7 0x100204 reaper
5 0 0 0 3 0x100204 pgdaemon pagedaemon
4 0 0 0 3 0x100204 pftm pfpurge
3 0 0 0 3 0x100204 usbtsk usbtask
2 0 0 0 3 0x100204 usbevt usb0
1 0 1 0 3 0x4084 wait init
