Hi,
there is a problem with Intel ICH6-M chipset support in current snapshot
(2005-09-22), it doesn't recognize devices (eg. sata controller).
I've checked, that it should be supported in current.
dmesg
--
OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) M processor 1.73GHz ("GenuineIntel" 686-class)
1.73 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 526491648 (514152K)
avail mem = 474501120 (463380K)
using 4278 buffers containing 26427392 bytes (25808K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(05) BIOS, date 05/30/05, BIOS32 rev. 0 @ 0xfd5f0
pcibios0 at bios0: rev 2.1 @ 0xfd5f0/0xa10
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0xf200! 0xcf800/0x1000 0xd0800/0x1600
0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 915GM/GMS Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801FB HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
(0x4101): irq 11 address 00:0b:5d:91:30:db
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci3 at ppb2 bus 3
cbb0 at pci3 dev 3 function 0 vendor "O2 Micro", unknown product 0x7134
rev 0x20: irq 11
"Intel PRO/Wireless 2200BG" rev 0x05 at pci3 dev 5 function 0 not configured
"Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci3 dev 6 function 0
not configured
cbb0: bad Vcc request. sock_ctrl 0xffffff88, sock_status 0xffffffff
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-831Db, 1.00> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801FBM IDE" rev 0x04: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: couldn't map channel 0 cmd regs
pciide1: channel 1 disabled (no drives)
"Intel 82801FB SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask ffed netmask ffed ttymask ffef
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
