Sorry, should have indicated I'm using OpenBSD version 3.8
dmesg:
OpenBSD 3.8-current (GENERIC) #169: Sun Oct 2 15:06:50 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class, 512KB L2 cache) 549
MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 670658560 (654940K)
avail mem = 604418048 (590252K)
using 4278 buffers containing 33636352 bytes (32848K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(1e) BIOS, date 02/23/00, BIOS32 rev. 0 @
0xfd7a0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x6600 0xce800/0x800
0xcf000/0x800 0xe0000/0x4000! 0xe4000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Magnum" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-M1222, 1004> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power" rev 0x02 at pci0 dev 7 function 3 not configured
yds0 at pci0 dev 12 function 0 "Yamaha 740C" rev 0x03: irq 10
xl0 at pci0 dev 13 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 11,
address 00:50:da:22:7c:7e
exphy0 at xl0 phy 24: 3Com internal media interface
ahc1 at pci0 dev 14 function 0 "Adaptec AHA-29160 U160" rev 0x02: irq 5
scsibus1 at ahc1: 16 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST39236LW, 0004> SCSI3 0/direct
fixed
sd0: 8761MB, 14384 cyl, 3 head, 415 sec, 512 bytes/sec, 17942584 sec
total
xl1 at pci0 dev 15 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 10,
address 00:01:02:46:25:77
bmtphy0 at xl1 phy 24: Broadcom 3C905C internal PHY, rev. 6
xl2 at pci0 dev 16 function 0 "3Com 3c905C 100Base-TX" rev 0x74: irq 9,
address 00:01:02:73:ec:be
bmtphy1 at xl2 phy 24: Broadcom 3C905C internal PHY, rev. 6
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f365 netmask ff65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 20.0MHz, offset = 0x1f
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
ac97: codec id 0x41445303 (Analog Devices AD1819)
ac97: codec features Analog Devices Phat Stereo
audio0 at yds0
opl0 at yds0: model OPL3
midi1 at opl0: <DS-1 integrated Yamaha OPL3>
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
mpu at yds0 not configured
On Fri, 2005-10-07 at 14:30 -0600, Ryan Puckett wrote:
> Under the Tables section in the pf.conf(5) man page, it is indicated
> that tables can be created with a valid interface group. I'm taking
> this to mean I can do the following:
>
> table <all-of-my-vlans> { vlan }
>
> or better yet:
>
> table <outside> { egress }
>
> but when loading up the ruleset or even trying to manually add the table
> via command line "pfctl -t outside -T add egress" I receive:
>
> no IP address found for egress
>
> I have no problems when specifying the exact interface such as vlan0.
>
> So my question is: did I misread this?
>
>
> Thanks
-Ryan
