On Fri, 18 Feb 2011 02:15:40 +0000 Nigel Taylor <[email protected]> wrote:
> On 02/18/11 00:52, Gianluca D'Auri Muscelli wrote: > > On Fri, 18 Feb 2011 00:29:55 +0000 > > Nigel Taylor <[email protected]> wrote: > > > >> On 02/18/11 00:09, Gianluca D'Auri Muscelli wrote: > >>> On Thu, 17 Feb 2011 19:29:54 +0100 > >>> Henning Brauer <[email protected]> wrote: > >>> > >>>> * Gianluca D'Auri Muscelli <[email protected]> [2011-02-17 18:59]: > >>>>> i have a usb wireless card RTL 8188s, > >>>>> openbsd4.8 find this card at ugen0 at uhub0 > >>>>> how i can install and work with this card?? > >>>> while this is incomplete information, tho chances are -current > >>>> (which is very close to 4.9-release, so best time to test it!) > >>>> will just work. > >>>> > >>>> rsu (4) - Realtek RTL8188SU/RTL8192SU USB IEEE 802.11b/g/n > >>>> wireless network device urtwn (4) - Realtek RTL8188CU/RTL8192CU > >>>> USB IEEE 802.11b/g/n wireless network device > >>>> > >>> Hi, > >>> i'v upgrade my box to openbsd 4.9 and now i look my card at rsu0 > >>> but now i look this message on console when i get up rsu0: > >>> rsu0:failed loadfirmware of file rsu-rtl18712fw (error 2).. > >>> > >>> tks vvm > >>> -- > >>> Gianluca D'Auri Muscelli > >>> <[email protected]> > >>> Fingerprint: 3A277FACD60A3D33388BC371F4548B69078A9A04 > >>> > >>> , , > >>> ,( ). > >>> | \,--_ / | > >>> /_ _ ` / > >>> /-.,-.` \ > >>> | | \ \ > >>> _\O|O | | > >>> (___)`--'_ / > >>> `.______/` / > >>> `.__, ,/ > >>> / \ > >>> <----. ,___/ __ \ > >>> <----|====)))==) \) /===== > >>> <----' `--' `.__,' | _ > >>> | | / \ > >>> \ _ /`-' \/ > >>> ,----` \ / > >>> \_,-----' \ > >>> \________/ > >>> > >>> [demime 1.01d removed an attachment of type > >>> application/pgp-signature which had a name of signature.asc] > >>> > >>> > >> HI, > >> > >> The rsu man page tells you to get the pre-packaged firmware from > >> > >> http://damien.bergamini.free.fr/packages/openbsd/rsu-firmware-1.1.tgz > >> > >> download, then pkg_add rsu-firmware-1.1 or > >> pkg_add -v > >> http://damien.bergamini.free.fr/packages/openbsd/rsu-firmware-1.1.tgz > >> > >> Have you done this? > >> > >> Regards > >> > >> Nigel Taylor > > yes tks, but now when i sudo sh /etc/netstart rsu0 > > rsu0.....no link > > and in console i look ' rsu0: could not send site survey command' > > my hostname.rsu0 is: > > dhcp NONE NONE NONE nwkey my_wep_password > > ;( > > > > > > > Hi, > > I don't use WEP, but your hostname.rsu0 looks correct, could try a > chan xx on the end of the hostname.rsu0 line. I use a "run" USB > device for which my hostname.run0 file looks like this, > dhcp NONE NONE NONE nwid xxxxxxxxxx chan 11 wpakey yyyyyyyy > > I do find that the "run" USB doesn't always work first time, or if > reconfigured, removing and inserting the USB device sorts that out, > or a reboot/ power off/on, you might have a similar problem. The > rsu/8188 is new to OpenBSD 4.9 added in Dec 2010, there could be some > issues still, how recent is the snapshot you are using. > > Did you try a ifconfig rsu0 scan before configuring to see if you see > any networks. > > It looks as if the console message is a failure to scan for the > network. Send a e-mail with the dmesg, output to the mail list with > the problem, I can't help when it comes to actual errors in the > device driver. > > > Regards > > Nigel Taylor > > > > > This is my dmesg, "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 (irq 11) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci5 at ppb4 bus 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 1 drive 0: <SSDPAMM0008G1> wd0: 1-sector PIO, LBA, 7695MB, 15761088 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17 (irq 11) iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed sd0: 3814MB, 512 bytes/sec, 7811072 sec total rsu0 at uhub0 port 1 "Manufacturer Realtek RTL8188S WLAN Adapter" rev 2.00/2.00 addr 2 rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:8b:16:75 uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 3 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b ath0: unable to reset hardware; hal status 3653737116 ath0: unable to reset hardware; hal status 3653737852 rsu0: could not send join command rsu0: could not send site survey command wsdisplay0: screen 3 deleted wsdisplay0: screen 3 added (80x50, vt100 emulation) ehci_idone: ex=0xd16a8000 is done! rsu0 detached rsu0 at uhub0 port 2 "Manufacturer Realtek RTL8188S WLAN Adapter" rev 2.00/2.00 addr 2 rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:8b:16:75 syncing disks... done r OpenBSD 4.9 (GENERIC.MP) #783: Wed Feb 16 13:49:29 MST 2011 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM ,MOVBE real mem = 523292672 (499MB) avail mem = 504578048 (481MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8ea0 (31 entries) bios0: vendor INSYDE version "v0.3109" date 05/09/2008 bios0: Acer AOA110 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM ,MOVBE ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (P32_) acpiprt2 at acpi0: bus 1 (EXP1) acpiprt3 at acpi0: bus 2 (EXP2) acpiprt4 at acpi0: bus 3 (EXP3) acpiprt5 at acpi0: bus 4 (EXP4) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpibat0 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit offline acpivideo0 at acpi0: OVGA acpivout0 at acpivideo0: CRT1 acpivout1 at acpivideo0: DTV1 acpivout2 at acpivideo0: DFP1 acpivout3 at acpivideo0: LCD_ acpivout4 at acpivideo0: DTV2 acpivout5 at acpivideo0: DFP2 bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x20000000, size 0x10000000 inteldrm0 at vga1: apic 4 int 16 (irq 11) drm0 at inteldrm0 "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int 16 (irq 11) azalia0: codecs: Realtek ALC268 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 (irq 255) pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), apic 4 int 17 (irq 11), address 00:1e:68:c2:fb:77 rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18 (irq 255) pci3 at ppb2 bus 3 ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 18 (irq 11) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:22:69:3c:f9:8f ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 (irq 255) pci4 at ppb3 bus 4 "JMicron SD/MMC" rev 0x00 at pci4 dev 0 function 0 not configured sdhc0 at pci4 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 4 int 19 (irq 11) sdmmc0 at sdhc0 "JMicron Memory Stick" rev 0x00 at pci4 dev 0 function 3 not configured "JMicron xD" rev 0x00 at pci4 dev 0 function 4 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 (irq 11) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci5 at ppb4 bus 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 1 drive 0: <SSDPAMM0008G1> wd0: 1-sector PIO, LBA, 7695MB, 15761088 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17 (irq 11) iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed sd0: 3814MB, 512 bytes/sec, 7811072 sec total rsu0 at uhub0 port 2 "Manufacturer Realtek RTL8188S WLAN Adapter" rev 2.00/2.00 addr 2 rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:8b:16:75 uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 3 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b rsu0: could not send site survey command wsdisplay0: screen 3 deleted wsdisplay0: screen 3 added (80x50, vt100 emulation) syncing disks... done OpenBSD 4.9 (GENERIC.MP) #783: Wed Feb 16 13:49:29 MST 2011 [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM ,MOVBE real mem = 523292672 (499MB) avail mem = 504578048 (481MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/09/08, SMBIOS rev. 2.4 @ 0xe8ea0 (31 entries) bios0: vendor INSYDE version "v0.3109" date 05/09/2008 bios0: Acer AOA110 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 132MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,A CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM ,MOVBE ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 5 (P32_) acpiprt2 at acpi0: bus 1 (EXP1) acpiprt3 at acpi0: bus 2 (EXP2) acpiprt4 at acpi0: bus 3 (EXP3) acpiprt5 at acpi0: bus 4 (EXP4) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpibat0 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpivideo0 at acpi0: OVGA acpivout0 at acpivideo0: CRT1 acpivout1 at acpivideo0: DTV1 acpivout2 at acpivideo0: DFP1 acpivout3 at acpivideo0: LCD_ acpivout4 at acpivideo0: DTV2 acpivout5 at acpivideo0: DFP2 bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x20000000, size 0x10000000 inteldrm0 at vga1: apic 4 int 16 (irq 11) drm0 at inteldrm0 "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4 int 16 (irq 11) azalia0: codecs: Realtek ALC268 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 4 int 17 (irq 255) pci2 at ppb1 bus 2 re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), apic 4 int 17 (irq 11), address 00:1e:68:c2:fb:77 rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18 (irq 255) pci3 at ppb2 bus 3 ath0 at pci3 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 18 (irq 11) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:22:69:3c:f9:8f ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19 (irq 255) pci4 at ppb3 bus 4 "JMicron SD/MMC" rev 0x00 at pci4 dev 0 function 0 not configured sdhc0 at pci4 dev 0 function 2 "JMicron SD Host Controller" rev 0x00: apic 4 int 19 (irq 11) sdmmc0 at sdhc0 "JMicron Memory Stick" rev 0x00 at pci4 dev 0 function 3 not configured "JMicron xD" rev 0x00 at pci4 dev 0 function 4 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17 (irq 11) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19 (irq 11) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci5 at ppb4 bus 5 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 1 drive 0: <SSDPAMM0008G1> wd0: 1-sector PIO, LBA, 7695MB, 15761088 sectors wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int 17 (irq 11) iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed sd0: 3814MB, 512 bytes/sec, 7811072 sec total rsu0 at uhub0 port 2 "Manufacturer Realtek RTL8188S WLAN Adapter" rev 2.00/2.00 addr 2 rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:8b:16:75 uvideo0 at uhub0 port 5 configuration 1 interface 0 "Sonix Technology Co., Ltd. USB 2.0 Camera" rev 2.00/1.00 addr 3 video0 at uvideo0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b rsu0: could not send site survey command wsdisplay0: screen 3 deleted wsdisplay0: screen 3 added (80x50, vt100 emulation) ath0: unable to reset hardware; hal status 3654421148 ath0: unable to reset hardware; hal status 3654421884 rsu0 detached rsu0 at uhub0 port 3 "Manufacturer Realtek RTL8188S WLAN Adapter" rev 2.00/2.00 addr 2 rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:8b:16:75 rsu0: could not send site survey command ehci_idone: ex=0xd16a8000 is done! rsu0 detached rsu0 at uhub0 port 3 "Manufacturer Realtek RTL8188S WLAN Adapter" rev 2.00/2.00 addr 2 rsu0: MAC/BB RTL8712 cut 3, address 00:02:72:8b:16:75 rsu0: could not send site survey command rsu0: could not send site survey command -- Gianluca D'Auri Muscelli <[email protected]> Fingerprint: 3A277FACD60A3D33388BC371F4548B69078A9A04 ,( ). | \,--_ / | /_ _ ` / /-.,-.` \ _____ ____ _____ _____ \O|O | | / ___ \ | _ \ / ____| __ \ (___)`--'_ / / / / /___ ___ ____ | |_) | (___ | | | | `.______/` / / / / / __ \/ _ \/ __ \| _ < \___ \| | | | `.__, ,/ / /__/ / /_/ / __/ / / /| |_) |____) | |__| | \_____/ .___/\___/_/ /_/ |____/|_____/|_____/ _______/ /______________________________________ /_/ [demime 1.01d removed an attachment of type application/pgp-signature which had a name of signature.asc]
