man Chan wrote: >Hello, > >I have a route problem in setting up my home network. >Here is the layout of it: > >internet > | >obsd3.6 (fw) > | 192.168.1.254 > | >switch (wired) > | > | 192.168.1.230 (vr0 wired) > | >obsd-3.8 > | > | 192.168.2.1 (ral0 wireless) > | >clients (Xp) > >My problem is: the XP can ssh to the obsd-3.8 through >wirelss. However it cannot access the internet. > >Thanks > >clarence > > >ifconfig at 192.168.1.230 >========================= >lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu >33224 > groups: lo > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 >ral0: >flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> >mtu 1500 > lladdr 00:12:17:68:80:74 > media: IEEE802.11 autoselect hostap > status: active > ieee80211: nwid obsd-group chan 6 bssid >00:12:17:68:80:74 100dBm > inet 192.168.2.1 netmask 0xffffff00 broadcast >192.168.2.255 > inet6 fe80::212:17ff:fe68:8074%ral0 prefixlen >64 scopeid 0x1 >vr0: >flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> >mtu 1500 > lladdr 00:0d:87:b4:63:8f > groups: egress > media: Ethernet autoselect (100baseTX >full-duplex) > status: active > inet 192.168.1.230 netmask 0xffffff00 >broadcast 192.168.1.255 > inet6 fe80::20d:87ff:feb4:638f%vr0 prefixlen >64 scopeid 0x2 >pflog0: flags=0<> mtu 33224 >pfsync0: flags=0<> mtu 1348 >enc0: flags=0<> mtu 1536 >bridge0: flags=41<UP,RUNNING> mtu 1500 > groups: bridge > > > > >_______________________________________ > 7Q'Y.I&,(l7s email 3q*>!H > $U8| Yahoo! Messenger http://messenger.yahoo.com.hk > > > Hi, do you have ip forwarding enabled? See man afterboot(8) "Check routing table" section for how to do it.
BR Marcus